Choosing the right synchronous SRAM for your application
Jayasree Nayar, Cypress Semiconductor
EETimes (3/5/2012 5:27 PM EST)
The choice of the right synchronous static random access memory (SRAM) is crucial for networking applications that have increased bandwidth requirements for better system performance. System designers need to be aware of the features and advantages of different synchronous SRAMs technologies to make the right memory selection for their application.
Some of the critical factors that determine the right synchronous SRAM choice are density, latency, speed, read/write ratio, and power. By understanding how these factors impact performance, reliability, and cost, designers can select the optimal synchronous SRAM for their application.
Synchronous SRAM is available in a variety of forms with different performance characteristics and benefits (see figure 1). Standard synchronous SRAM is commonly used in industrial electronics, instrumentation, and military applications. The devices are often used as data buffers (temporary storage) and can be accessed randomly through their high speed, single data rate (SDR) interfaces. Standard synchronous burst SRAMs are ideal for dominated read or write operations. Customers have a choice between flow-through (FT) or pipelined (PL) architectures with user selectable linear and interleaved burst modes, as well as single-cycle deselect (SCD) and double-cycle deselect (DCD) options.
To read the full article, click here
Related Semiconductor IP
- VeriSilicon SMIC 0.13um Ultra-Low-Power Synchronous Single-Port SRAM compiler,Memory Array Range:512 to 512K Bits
- VeriSilicon SMIC 0.13um High-Speed Synchronous Single-Port SRAM compiler, Memory Array Range:256 to 128K Bits
- VeriSilicon SMIC 0.13umLL 1P3M High-Density Synchronous Single-Port SRAM compiler, Memory Array Range:128 to 512K Bits
- SMIC 0.13um High-Speed Synchronous Single-Port/Dual-Port SRAM
- 110nm BCD process Synchronous High-Density Single-Port SRAM Compiler
Related White Papers
- Interfacing QDR-II+ Synchronous SRAM with high-speed FPGAs, part 2
- Designing an Efficient DSP Solution: Choosing the Right Processor and Software Development Toolchain
- It's Just a Jump to the Left, Right? Shift Left in IC Design Enablement
- Select the Right Microcontroller IP for Your High-Integrity SoCs
Latest White Papers
- OmniSim: Simulating Hardware with C Speed and RTL Accuracy for High-Level Synthesis Designs
- Balancing Power and Performance With Task Dependencies in Multi-Core Systems
- LLM Inference with Codebook-based Q4X Quantization using the Llama.cpp Framework on RISC-V Vector CPUs
- PCIe 5.0: The universal high-speed interconnect for High Bandwidth and Low Latency Applications Design Challenges & Solutions
- Basilisk: A 34 mm2 End-to-End Open-Source 64-bit Linux-Capable RISC-V SoC in 130nm BiCMOS