Analog Basics IP

Compare 71 Analog Basics IP from 20 vendors (1 - 10)

39GHz High-Efficiency CMOS Power Amplifier for 5G mmWave Applications
- 2-stage PAEmax = 45%
- PA-stage DEmax = 54%
- Psat = 18.3dBm
- Gain = 19dB
- Efficiency maintained at lower supply voltages for added reliability
28GHz High-Efficiency CMOS Power Amplifier for 5G mmWave Applications
- 2-stage PAEmax = 52.3%
- PA-stage DEmax = 61.5%
- Psat = 19.02dBm
Very-low-noise and programmable very-high-gain DC-voltage amplifier with precision offset trimming
- The TS_VA_LNDC_X8 comprises the main function dcamp and its companion dcamptrim.
- The dcamp is a very-low-output-noise-level (604µVRMS max) and 1%-precise programmable very-high-gain (32 selectable gains up to 400V/V) DC-voltage amplifier, with an extra differential input for precision offset trimming by the dual 8-bit one’s-complement-coded DAC dcamptrim.
Revolutionaly Ultra Low Phase Noise RF Amplifier-LNA IP
- Revolutionary Ultra Low Phase Noise operation
- Ultra Low Power Operation
- RF front end sensitivity enhancement
130 to 940 MHz Power amplifier
- iHP SGB25V
- E class PA
- Adjusted gain (-20..10 dBmW)
- Build-in voltage regulator
Programmable-Threshold Comparator
- The agileCMP GP Programmable Threshold Comparator features a user-selectable (enable/disable) hysteresis as well as programmable threshold with 10mV step size, a latched output, as well as an active (unlatched) output.
- With a focus on long battery life, the agileCMP GP can be used to monitor external analog signals and enable wake-up events as is essential in many modern SoCs.
- The agileCMP GP Programmable Threshold Comparator is ideally suited for interrupt generation in applications such as in IoT, Security, Automotive, AI and general SoCs and ASICs.
Low Power Comparator
- The agileCMP_LP is a comparator suitable for use in any low power system. It is designed to provide a flexible range of comparison voltages suitable for many sensor interface designs.
- The agileCMP_LP consists of a voltage reference generator and comparator set at different threshold levels for multi-level detection and the output is not latched.
3 to 5 GHz power amplifier
- iHP SiGe BiCMOS 0.13 um
- E class PA
- Frequency range 3…5 GHz
- Built-in voltage regulator
8-channel 8-bit voltage comparator
- TSMC 28nm eFlash technology
- 8 channel synchronous comparator
- 25ns conversion time
- Up to 80MHz external clock
Baseband power amplifier with attenuator
- TSMC 65 nm CRN65LP
- Differential inputs, outputs
- High frequency 2 – 100 MHz
- Available attenuation range from 0 to 60 dB (step by 1 dB)