Bluetooth IP

This IP includes a recommendation-compliant 802.11ax PHY layer C floating-point code for the Station (STA) mode.
The code is integrated into a simulation environment that allows the configuration of mandatory features and the performance evaluation in terms of frame error rate.
It is designed to generate fixed-point sequences in order to accelerate the development of both C fixed-point code and HDL code for prototyping environments.

The 802.11ah HaLow Transceiver meets the bandwidth and power consumption requirements of a new generation of IoT and mobile devices, where battery life and extended range are prerequisites for successful deployment.
It meets the IEEE 802.11ah standard, known as Wi-Fi HaLow™.

These high performance cores have been designed to provide hardware acceleration of the underlying 802.11 WPA security algorithms, which in combination with the Helion AES-CCM core family, may be used to implement a full 802.11i WPA24 security solution very efficiently in Xilinx FPGA.
The security processing is split into two parts, since they are likely to be required at different points within the MAC subsystem.

Fully compliant with Bluetooth Specifications Ver 1.1 as specified by Special Interest Group (SIG).
Compliance to Test Suites as provided Standard Sample Test from Bluetooth Qualification Body (BQB).
Reduced Area by logical sharing thereby Low Power Consumption.
Time Division Duplex (TDD).

Dual-band Wi-Fi IP with a low-power wakeup radio, aimed at energy-efficient, always-on connectivity.

Energy-efficient Wi-Fi 6 (802.11ax) IoT IP designed for high-speed, reliable smart device connectivity.

High-performance Wi-Fi 6 (802.11ax) IP for enhanced, efficient wireless connectivity.

Provides Ethernet fully compliant to 802.3-2018 supporting all media independent interfaces for (1/10/25/40/50/100/200/400/800 G)
Provides PTP as per IEEE 1588-2008 specification
- Supports BMCA
- Supports PTP Delay Request Mechanism (Announce-sync-FollowUp-DelayReq-DelayResp)
- Supports PTP Peer Delay Mechanism (PdelayReq – PdelayResp - PdelayRespFollowUp)
- Supports Local Clock generation with user configurable start for timestamp generation
- Supports Master-Slave and slave only port state machines capable with support for all message timers
- Supports basic Management Messages with user control from test/sequence
- Supports one step and two step clock timestamping
Supports BMCA
Supports PTP Delay Request Mechanism (Announce-sync-FollowUp-DelayReq-DelayResp)

The icyTRX ultra-low-power RF transceiver is designed to meet standards such as Bluetooth Low Energy (BLE), 802.15.4 PHY Layer (e.g. ZigBee), and proprietary standards with data rates from 62.5 kBit/s up to 4 Mbit/s.
icyTRX offers 5.3 mW consumption in receive mode from a 1.0 V supply. icyTRX is a complete transceiver that is designed for miniaturization, yielding an area of analog RF of less than 1 mm2 in 55 nm CMOS, requiring minimal external components thanks to high degree of integration. icyTRX is designed for easy integration into ASICs and SoCs.