Embedded Systems: Programmable Logic -> Common gateway networks enable remote programs
 |
Common gateway networks enable remote programs
By Login Harris and David Atkisson, EE Times
February 16, 2001 (1:20 p.m. EST)
URL: http://www.eetimes.com/story/OEG20010216S0038
There is no shortage of common gateway networks to consider: Gateway modem RS485 subnet Modem-to-RS485 subnet Instead of a gateway linking over a pair of modems to a remote device, the gateway links over a pair of modems to an RS485 subnet master, which communicates to the subnet devices. Only one modem is needed for the entire subnet of devices. The gateway does not need to be in the same location as the RS485 subnet, since it communicates with the subnet via modem. The same gateway could, in fact, access multiple remote RS485 subnets. Again, an ISP could manage the gateway and phone network. Ethernet subnet Other options
In this scenario a gateway network communicates through a pair of modems to the remote device using a lightweight protocol. This scenario contains all of the advantages of the "lightweight network-modem" scenario as well as all of the advantages of a general gateway network. In addition, the local client, the gateway and the remote device can be in three different locations, or the local client and gateway can be in the same location and the remote device in another location. Some Internet service providers, such as AT&T Global Network Services, can provide device gateway services and local phone connections to just about anywhere in the world.
To utilize an RS485 subnet with a gateway network, the gateway is the remote RS485 subnet master that communicates to the subnet devices. This is a good arrangement if a ga teway and several devices are within the range of an RS485 subnet.
This network arrangement is a combination of the modem and RS485 subnet gateway networks described.
In this scenario a gateway network communicates on an Ethernet subnet with remote devices, using a lightweight protocol. This arrangement is similar to the RS485 subnet example but using Ethernet as the transport medium instead of an RS485 subnet. This t ype of network architecture leverages existing Ethernet wiring.
In addition, other gateway network subnet technologies exist. They include power line, RF, IR, two-way pager, field bus and TCP/IP.
Related Semiconductor IP
- AES GCM IP Core
- High Speed Ethernet Quad 10G to 100G PCS
- High Speed Ethernet Gen-2 Quad 100G PCS IP
- High Speed Ethernet 4/2/1-Lane 100G PCS
- High Speed Ethernet 2/4/8-Lane 200G/400G PCS
Related White Papers
- Embedded Systems: Programmable Logic -> FPGAs don remote reprogram habits
- Implementing Ultra Low Latency Data Center Services with Programmable Logic
- How Low Can You Go? Pushing the Limits of Transistors - Deep Low Voltage Enablement of Embedded Memories and Logic Libraries to Achieve Extreme Low Power
- Embedded Systems: Programmable Logic -> Programming enters designer's core
Latest White Papers
- New Realities Demand a New Approach to System Verification and Validation
- How silicon and circuit optimizations help FPGAs offer lower size, power and cost in video bridging applications
- Sustainable Hardware Specialization
- PCIe IP With Enhanced Security For The Automotive Market
- Top 5 Reasons why CPU is the Best Processor for AI Inference