USB 3.1 vs USB 3.0: Technical Comparison
Initially, USB provided two speeds (12 Mbps and 1.5 Mbps). With rapid adoption and success of the USB standard and the increasing power of PCs and computing devices, the USB 2.0 specification was defined in the year 2000. USB 2.0 provided upto 480 Mbps of bandwidth while keeping software compatibility with earlier USB applications. With ever increasing bandwidth requirements, in 2008 the USB 3.0 specification (providing 5 Gbps bi-directional bandwidth) was released. USB 3.1 is the next logical step in this progression. It provides 10Gbps of bi-directional bandwidth while maintaining backward compatibility with previous USB versions.
In this post, we will analyze the technical differences between the USB 3.1 and USB 3.0 specifications. The aim is to enable people familiar with USB 3.0 to quickly understand the main aspects of USB 3.1.
We will analyze the PHY, Link and Protocol layers and list out the major ways in which USB 3.1 differs from USB 3.0.
Related Semiconductor IP
- NFC wireless interface supporting ISO14443 A and B with EEPROM on SMIC 180nm
- DDR5 MRDIMM PHY and Controller
- RVA23, Multi-cluster, Hypervisor and Android
- HBM4E PHY and controller
- LZ4/Snappy Data Compressor
Related Blogs
- USB 3.1 vs USB 3.0: Technical Comparison
- Technical Comparison: MIPI MPHY 3.1 vs MPHY 3.0
- Technical Comparison: USB Power Delivery r1.0 vs r2.0
- Technical Comparison - MPHY 3.0 vs MPHY 2.0
Latest Blogs
- lowRISC Tackles Post-Quantum Cryptography Challenges through Research Collaborations
- How to Solve the Size, Weight, Power and Cooling Challenge in Radar & Radio Frequency Modulation Classification
- Programmable Hardware Delivers 10,000X Improvement in Verification Speed over Software for Forward Error Correction
- The Integrated Design Challenge: Developing Chip, Software, and System in Unison
- Introducing Mi-V RV32 v4.0 Soft Processor: Enhanced RISC-V Power