USB Phy IP

Compare 335 USB Phy IP from 22 vendors (1 - 10)

USB2.0 Host Transceiver
- Fully compliant with latest USB 2.0
- Innovative technique to recover clock from 480 Mbps data.
- High frequency PLL.
- Advanced High-Speed Transmitter and Receiver.
USB 2.0 Device Transceiver
- Fully compliant with latest USB2.0 spec version 2.0.
- Innovative technique for clock recovery from 480 Mbps data.
- High frequency PLL.
- Advanced high-speed transmitter and receiver.
USB3.2 PHY & Controller
- USB is the ubiquitous interconnect standard of choice for a wide range of computing and consumer applications
- Innosilicon provides a comprehensive set of software drivers to support commonly used USB peripherals
- In addition, our established USB ecosystem—comprising USB silicon suppliers, design IP houses, and verification and testing vendors—helps reduce development and production costs for USB host and peripheral manufacturers
USB2.0 PHY(HSIC/Host/Device/OTG/Hub)/ eUSB PHY
- USB is the ubiquitous interconnect standard of choice for a wide range of computing and consumer applications
- Innosilicon provides a comprehensive set of software drivers to support commonly used USB peripherals
- In addition, our established USB ecosystem—comprising USB silicon suppliers, design IP houses, and verification and testing vendors—helps reduce development and production costs for USB host and peripheral manufacturers
USB PD Synthesizable Transactor
- USB PD Features
- Supports USB Power Delivery Specification 3.1,3.0, 2.0 and 1.0
- Supports USB Type-C Cable and Connector Specification
- Supports Cable plug communication
USB 3.1 PHY
- Supports USB 3.1, PCIe 3.1, DP-TX v1.4/eDP-TX v1.4b, SATA 3, 10G-KR and QSGMII/SGMII
- Multi-protocol support for simultaneous independent links
- Supports SRIS and internal SSC generation
- Supports PCIe L1 sub-states
- Automatic calibration of on-chip termination resistors
USB 2.0 PHY
- Designed to the USB 2.0 specification, and operates at High Speed (480Mbps), Full Speed (12Mbps), and Low Speed (1.5Mbps)
- Complies with the UTMI v1.05 specification
- Multiple reference clock supported from 9.6MHz up to 52MHz
- 8-bit 60MHz and 16-bit 30MHz parallel interfaces
- Battery Charging Specification v1.2
eUSB2V2 PHY
- Up to 4.8Gbps scalable data rate
- Compliant to eUSB2V2 r1.0 / UTMI2.0 r0.9
- Configurable to Host or Peripheral
- Supports L1/L2 low power state
- Supports eUSB2V2 Compliance Modes and RxMargining Mode
- Support 19.2/24/48/100 MHz Ref Clocks
USB 1.1/2.0 full speed USB PHY
- USB PHY Interface
- USB1.1/2.0 Compliant
- Low and Full speed support
- UTMI Interface to USB Controller
MCU-less USB Billboard Device Controller
- USB 2.0-certified, Full-Speed (12 Mbps)
- Supports native Billboard Device class driver
- Integrated USB termination resistors
- Allows the use of SRAM and ROM for storing configuration parameters