POR IP
All offers in
POR IP
Filter
Compare
33
POR IP
from 8 vendors
(1
-
10)
-
Power-On-Reset IP
- The Power-On-Reset (POR) IP provides reliable reset functions for general applications
- It is powered by analog supply and monitors both analog and digital supply
- The POR IP generates a POR signal to reset the digital logic
-
BANDGAP POR & APC Advanced Power Controller with Power on Reset (Vin=1.08-1.98V)
- The SGC21412 is a versatile and scalable Power Controller for SoC integration
- When used standalone acts as a robust POR with monitoring functions
- When part of a PMU (Power Management Unit) acts as the backbone
- On a PMU it provides all the essential support functions, such as high PSRR voltage and current references, Under Voltge Lock Out (UVLO), start-up sequencing, Power On Reset (POR) and Power On Controller (POC)
-
Power-On Reset - Flexible Threshold (0.9–1.6V), Ultra Low Current (210nA) - Silterra 0.16 um
- This macro-cell is an ultra low consumption Power-On Reset (POR) core designed for SilTerra 0.16μm C16G CMOS technology.
- The on threshold sensing voltage can be configured from 960mV to 1.62V (default are 1.1V @ 1.2V and 1.23V @ 1.8V).
-
Power On Reset
- Input threshold 2VT.
- Reset and reset bar output logic levels.
- Minimum 8uS reset pulse for any power rise time.
- 1µA typical supply current.
- -40°C to 120°C temperature operation.
-
Power On Reset on TSMC CLN7FF
- Integrated voltage and time references for precision stand-alone operation
- Easy to integrate with no additional component or special power requirements
- Easy to use and configure
- Programmable hysteresis, with independent programming available for power-on and power-off levels,
-
Automotive Grade 1 – Power On Reset on GLOBALFOUNDRIES 22FDX-AG1
- Integrated voltage and time references for precision stand-alone operation
- Easy to integrate with no additional component or special power requirements
- Easy to use and configure
- Programmable hysteresis, with independent programming available for power-on and power-off levels,
-
Power on Reset
- TSMC SiGe BiCMOS 0.18 um
- Low current consumption
- Small layout area
- Portable to other technologies (upon request)
-
Power on Reset 1.2V
- SMIC 55nm LL technology
- Noise protected
- Low current consumption (~1uA)
-
Power on Reset with detector
- Global Foundries CMOS 55nm
- Low current consumption
- Small area
-
Power on Reset
- TSMC CMOS 65 nm
- Input voltage range: from 0.9 V to 1.3 V
- Embedded power on reset module
- Low quiescent current