IP for GLOBALFOUNDRIES
Welcome to the ultimate
IP
for
GLOBALFOUNDRIES
hub! Explore our vast directory of
IP
for
GLOBALFOUNDRIES
All offers in
IP
for
GLOBALFOUNDRIES
Filter
Compare
131
IP
for
GLOBALFOUNDRIES
from
17
vendors
(1
-
10)
Filter:
- 12nm
-
12-bit, 2 GSPS High Performance ADC in 12nm CMOS
- The ODT-ADS-12B2G-12nm is an ultra-highperformance time-interleaved ADC designed in a 12nm CMOS process.
- This 12-bit, 2GSPS ADC supports input signals up to 1.0 GHz and features a differential full-scale range of 0.8Vpp and excellent static and dynamic performance.
-
10-bit, 5 MSPS ADC in 12nm CMOS on GF 12nm LP+
- The ADC is an ultra-low-power ADC designed in a GF 12nm LP+ process.
- This 10-bit, 5MSPS ADC supports input signals up to 1 MHz and features 2V differential full-scale input range with excellent static and dynamic performance. The input front-end includes a 4:1 mux.
-
PVT Sensor Subsystem
- Start-up time: Typ 20us
- Current consumption: Max 25uA
- Industry standard digital interface
- Fully integrated macro
- Standard AMBA APB interface
-
All Digital Fractional-N RF Frequency Synthesizer PLL in GlobalFoundries 12LPP/14LPP
- Fractional Multiplication with frequencies up to 8GHz
- Extremely low jitter (< 300fs RMS)
- Small size (< 0.05 sq mm)
- Low Power (< 10mW)
-
All Digital Fractional-N PLL for Performance Computing in GlobalFoundries 12LPP/14LPP
- Fractional multiplication with frequency up to 4GHz
- Low jitter (< 10ps RMS)
- Small size (< 0.01 sq mm)
- Low Power (< 5mW)
- Support for multi-PLL systems
-
General Purpose All Digital Fractional-N PLL in GlobalFoundries 12LPP/14LPP
- Low jitter (< 18ps RMS)
- Small size (< 0.01 sq mm)
- Low Power (< 3.5mW)
- Support for multi-PLL systems
-
Low Power All Digital Fractional-N PLL in GlobalFoundries 12LPP/14LPP
- Low power, suitable for IoT applications
- Good jitter, suitable for clocking digital logic.
- Extremely small die area (< 0.005 sq mm), using a ring oscillator
- Output frequency can be from 1 to 400 times the input reference, up to 1.5GHz
- Reference clock from 5MHz to 200MHz
-
Low Power All Digital Fractional-N PLL in GlobalFoundries 22FDX
- Low power, suitable for IoT applications
- Good jitter, suitable for clocking digital logic.
- Extremely small die area (< 0.01 sq mm), using a ring oscillator
- Output frequency can be from 1 to 200 times the input reference, up to 1.0GHz
-
Ultra-short reach SerDes with 500 Gbit/s throughput
- 2x to 4x throughput at 50% or less energy consumption as compared to conventional SerDes over the same number of pins/wires
- High pin-efficiency and low power
- 208.3 Gbit/s full-duplex bandwidth per mm of die edge (500 Gbit/s for 2.4 mm of die edge)
-
1.8V and 3.3V Radiation-Hardened GPIO with Optimized LDO in GF 12nm
- A radiation-hardened GlobalFoundries 12nm LP/LP+ Flip-Chip IO library with both 1.8V and 3.3V GPIO, fail-safe GPI, analog cell, and associated ESD. Also features an LDO optimized for use with 3.3V GPIO.
- This radiation-hardened, by design, library features both a 1.8 and 3.3V GPIO with multiple drive strengths of 2mA, 4mA, 8mA, and 16mA, along with a full-speed output enable function.
