VME Controller IP
Welcome to the ultimate VME Controller IP hub! Explore our vast directory of VME Controller IP
All offers in
VME Controller IP
Filter
Compare
6
VME Controller IP
from 2 vendors
(1
-
6)
-
VME Slave Controller
- This VME64 slave controller is designed for custom integration using standard FPGA and ASIC technologies.
- It is fully compliant to the VME specification supporting A16/A24/A32 address mode, D8/D16/D32 data modes (read/write/read-modify-write), D16-BLT, D32-BLT, D64-MBLT, as well as interrupt acknowledge cycles.
-
VME Slave Controller Core
- The VMESmodule is a complete VME Slave Controller core bridging the VME bus and the local bus.
- The core contains a VME Slave, a VME interrupter, mailbox and semaphore registers, a local interrupt controller, provisioning for CR/CSR, and a generic local bus interface.
-
VME System Controller with AXI4 compliant user interface
- The VMESCmodule2 is Inicore's next generation VME System Controller core designed for FPGA and ASIC integrations.
- The core contains VME Slave and Master functions as well as System Controller features such as bus timer, arbiter, IACK daisy-chain driver, system clock driver and provisioning for CSR.
-
VME System Controller with AXI4 user interface and 2eSST support
- The VMESCmodule2 is Inicore's next generation VME System Controller core designed for FPGA and ASIC integrations.
- The core contains VME Slave and Master functions as well as System Controller features such as bus timer, arbiter, IACK daisy-chain driver, system clock driver and provisioning for CSR.
-
VME System Controller
- The VMESCmodule is a VME to local bus bridge containing a VME slave with 4 memory window decoders, a VME master with integrated DMA engine, a programable VME interrupter supporting IRQ1-IRQ7 request levels, an autonomous VME interrupt handler, and a VME system controller.
- The system controller has a bus arbiter supporting prioritized and round-robin arbitration, a programmable bus timer, a system clock driver, a system reset driver, and an interrupt daisy-chain driver.
- System controller functionality can be enabled or disabled by using control inputs, or is automatically set when the controller is located in VME slot 1.
-
Simulation VIP for NVMe
- Admin Command Set
- Supports all of the mandatory Admin Command set, which defines the commands that can be submitted to the Admin Submission Queue
- NVM Command Set
- Supports all of the mandatory NVM command set, which is a specification-defined I/O command set used with an I/O queue pair