NFC IP
Welcome to the ultimate NFC IP hub! Explore our vast directory of NFC IP
All offers in
NFC IP
Filter
Compare
14
NFC IP
from 6 vendors
(1
-
10)
-
Passive/active NFC transceiver
- TSMC 180 nm 6 metals generic process without analog options
- Differential antenna interfaces with dedicated external capacitors for antenna impedance matching
-
NFC (PICC, UHF, Controller) IP
- NFC PICC Front-End IP - ISO/IEC 14443-A/B compliant: Data rates from 106kbps to 848kbps
- ISO/IEC 15693 compliant: PICC to PCD: one and two-subcarrier modes: PCD to PICC: 1 of 4, 1 of 256 : ASK modulation from 10% to 100%
- Fully passive (power harvesting by reader chip)
- UHF Front-End IP - Fully EPCGlobal Class 1 Gen2 / ISO18000-6C standards compliant
-
NFC transceiver compliant with the ISO 14443-A, ISO 14443-B, ISO 18092 and ISO 15693 standards
- fully compliant with the ISO 14443-A, ISO 14443-B, ISO 18092 and ISO 15693 standards
- fully integrated IP including the analog front-end and the digital protocol controller
- configurable antenna driver
- ASK and OOK modulator
-
ISO/IEC 14443 type A/B dual-interface Analog Front End (AFE) compliant with the NFC standards
- fully compliant with the ISO/IEC 14443 standard and the relevant ISO/IEC 10373-6 tests
- both contact - class A, B & C - and contactless transmission of power
- support both Type A and Type B transmission protocols
- supported bit rates (Rx and Tx):
-
ISO/IEC 14443 type A/B Analog Front End (AFE) compliant with the NFC standards
- fully compliant with the ISO/IEC 14443 standard
- fully compliant with the relevant ISO/IEC 10373-6 tests
- contactless transmission of both data and power
- support both Type A and Type B transmission protocols
-
UHF RFID tag IC with 3.6kBit EEPROM and -19.5dBm sensitivity
- GF Embedded EEPROM 130 nm
- Read sensitivity -19.5 dBm
- Write sensitivity -17 dBm
- Impedance 20-j300 Ohm @915 MHz
-
NFC/RFID Controller
- UMC CMOS 180 nm technology
- Complete RFID reader solution, including RF front-end and 8051-based MCU
-
NFC/RFID Transceiver
- UMC CMOS 180 nm technology
- Supports ISO14443A* and ISO14443B standards in both reader and card emulation mode
- Supports NFC Initiator in both Active and Passive modes with speeds 212 and 424 Kbps
- Supports NFC Target in both Active and Passive modes with speeds 212 and 424 Kbps
-
UHF RFID EPC Gen2V2 physical interface
- SMIC 180nm EEPROM technology
- Operating temperature range -40…+85 °C
- Operating frequency 860 - 960 MHz
-
UHF RFID EPC Gen2 physical interface
- Global Foundries Embedded EEPROM 130nm
- Operating temperature range -40…+85 °C
- 2 operation modes: Passive mode and Battery assisted passive (BAP) mode
- Operating frequency 860 - 960 MHz