IP Catalog > Interface IP > RapidIO IP

RapidIO IP

Welcome to the ultimate RapidIO IP hub! Explore our vast directory of RapidIO IP
All offers in RapidIO IP
Filter
Filter

Login required.

Sign in

Search (16)
Compare 16 RapidIO IP from 8 vendors (1 - 10)
  • RapidIO Verification IP (VIP)
    • The RapidIO Verification IP (VIP) provides highly capable compliance verification solution for the RapidIO protocol.
    • The RapidIO VIP is system Verilog (SV) based and supports standard Universal Verification Methodology (UVM).
    • It can be easily combined with any other UVM compliant verification components to extend a broader verification environment.
    Block Diagram -- RapidIO Verification IP (VIP)
  • RapidIO to AXI Bridge (RAB)
    • The RapidlO-AXI Bridge (RIO-AXI Bridge) is a highly flexible and configurable IP used along with the native RapidlO Controller (GRIO) to provide RapidlO interface on one side and AXI interface on the system side.
    • The Bridge has been architectured to interface with a RapidlO controller used as a Host or device.
    • The RIO-AXI BRIDGE uses high speed multi-channel DMA Messaging and data streaming controllers to match the bandwidth requirements of the RIO solution.
    Block Diagram -- RapidIO to AXI Bridge (RAB)
  • RapidIO Controller with V4.1 Support
    • The RapidlO Controller solution (GRIO™) is a highly flexible and configurable IP.
    • The RapidlO Controller Solution can be used as a Host or device.
    • The RapidlO Controller when used along with the RapidlO to AXI Bridge (RAB) provides high speed multi-channel DMA Data Message and Data streaming functionality to match the bandwidth requirements of the RapidlO interface.
    Block Diagram -- RapidIO Controller with V4.1 Support
  • Rapid IO 4.0/3.1/2.2 PHY
    • 4 Channel per Quad
    • Shared Quad common PLL architecture
    • Digitally-control-impedance termination resistors
    • Configurable TX output differential voltage swing
    Block Diagram -- Rapid IO 4.0/3.1/2.2 PHY
  • RapidIO Verification IP
    • Supports RapidIO specification 1.3, 2.0, 2.1, 2.2, 3.0, 3.1, 3.2, 4.0 and 4.1.
    • Supports Serial 1x/2x/4x/8x and 16x Physical lanes.
    • Supports 8b/10b and 64b/67b Encode and Decode functions.
    • Supports scrambler/Descrambler.
    Block Diagram -- RapidIO Verification IP
  • RapidIO Synthesizable Transactor
    • Supports RapidIO specification 1.3, 2.0, 2.1, 2.2, 3.0, 3.1, 3.2, 4.0 and 4.1.
    • Supports Serial 1x/2x/4x/8x and 16x Physical lanes.
    • Supports 25.78125Gbaud/s, 12.5Gbaud/s, 10.3125Gbaud/s, 6.25Gbaud/s, 5Gbaud/s,3.125 Gbaud/s, 2.5 Gbaud/s, 1.25 Gbaud/s.
    • 8b/10b Encode and Decode functions.
    Block Diagram -- RapidIO Synthesizable Transactor
  • RAPIDIO EndPoint Controller IIP
    • Compliant with RapidIO Interconnect 2.2 specification
    • Supports all Capability Registers(CARs) and Configuration and Status Registers(CSRs)
    • Supports high link utilization and low latency
    • Supports efficient receive and transmit buffering scheme
    Block Diagram -- RAPIDIO EndPoint Controller IIP
  • Serial RapidIO 2.1 Endpoint IP Core
    • LatticeECP3 AMC Evaluation board
    • Associated cables
    • AMC interface card
    • Demonstration bitstreams and files
    Block Diagram -- Serial RapidIO 2.1 Endpoint IP Core
  • Serial RapidIO - Physical Layer Interface
    • Supports High Speed 1x Mode (up to 2.5 Gbps)
    • 8B/10B Encoding and Decoding
    • Clock and Data Recovery (CDR)
    • Lane Synchronization
    Block Diagram -- Serial RapidIO - Physical Layer Interface
  • LogiCORE IP Serial RapidIO Gen 2
    • 1x, 2x, & 4x Serial PHY - supports Artix-7, Kintex-7, Zynq-7000, Virtex-7, and Virtex-6 FPGAs
    • 1x, 2x & 4x Serial PHY - supports 1.25, 2.5, 3.125, 5.0, and 6.25 Gbps line speed
    • Supports IDLE1 and IDLE2 sequence
    • Supports Packet Retry, stomp, transmission error recovery, throttle-based flow control and CRC
×
Semiconductor IP