LTE IP

Welcome to the ultimate LTE IP hub! Explore our vast directory of LTE IP
All offers in LTE IP
Filter
Filter

Login required.

Sign in

Login required.

Sign in

Login required.

Sign in

Compare 49 LTE IP from 17 vendors (1 - 10)
  • LTE IP
    • Scalable and robust LTE IP for seamless 4G wireless communications integration.
    Block Diagram -- LTE IP
  • Ethernet 1G/2.5G/5G/10G/25G and CPRI 7.0 PCS
    • Delivers Performance
    • Feature Rich
    • Highly Configurable
    • Silicon Agnostic
    Block Diagram -- Ethernet 1G/2.5G/5G/10G/25G and CPRI 7.0 PCS
  • NTN eNodeB System Test Bench
    • Allows end-to-end testing of NB-IoT NTN system in lab environment.
    • supports 3GPP® Release 17 and 18 standards.
    • supports LEO transparent or regenerative modes of operation.
    • multiple-instancing and virtualisation to simulate UE community.
    Block Diagram -- NTN eNodeB System Test Bench
  • NTN System Test Bench
    • Allows end-to-end testing of NB-IoT NTN system in lab environment.
    • supports 3GPP® Release 17 and 18 standards.
    • supports LEO transparent or regenerative modes of operation.
    • multiple-instancing and virtualisation to simulate UE community.
    Block Diagram -- NTN System Test Bench
  • LTE Release-9 UE PHY. (L1) IP
    • 3GPP Release 9 compliant
    • Category 4
    • 2×2 MIMO and SISO support
    • 2 Tx and 2 Rx
    Block Diagram -- LTE Release-9 UE PHY. (L1) IP
  • LTE Release-10 Baseband Protocol Stack (L2-L3) SW IP
    • Modular design with low power radio module that supports all LTE bands.
    • Radio front end available for Band 28, Band 7, Band 40
    • Hardware capable of single or 3 sector operation.
    • Interoperated with majority of the UE chip vendors.
    Block Diagram -- LTE Release-10 Baseband Protocol Stack (L2-L3) SW IP
  • LTE Release-9 UE Protocol Stack (L2-L3) SW IP
    • 3GPP Release 9 compliant
    • Category 4
    • 2×2 MIMO
    • 2 Tx and 2 Rx
    Block Diagram -- LTE Release-9 UE Protocol Stack (L2-L3) SW IP
  • Narrow band - IoT Ultra-Low power UE RF Transceiver IP
    • Frequency Range: 100MHz - 2.6GHz
    • Bandwidth Range: 180KHz ~ 20MHz
    • Silicon proven in TSMC 40ULP
    • Supports both HD-FDD/TDD modes.
    Block Diagram -- Narrow band - IoT Ultra-Low power UE RF Transceiver IP
  • LTE NB-IOT (NB1) power optimized transceiver for cellular IoT
    • Meeting the performance requirements of 3GPP LTE Advanced Release 14 for NB-IOT
    • Support for Low Band (LB), from 699MHz to 960MHz: bands 5, 8, 12, 13, 17, 18, 19, 20, 26, 28.
    • Support for High Band (HB), from 1695MHz to 2200MHz: bands 1, 2, 3, 66, 70
    • Direct conversion receiver with a noise figure of less than 2.5 dB
    Block Diagram -- LTE NB-IOT (NB1) power optimized transceiver for cellular IoT
  • Digital PreDistortion IP
    • Better than 40 dB ACLR improvement depending upon the DPD configuration and system specifications/characteristics.
    • Scalable linearization capabilities to suit deployment system and optimise silicon resources.
    • Provides quadrature error correction (QEC), automatic gain control and frequency error compensation.
    • Supports single or multi-carrier instantaneous signal bandwidths from kHz to hundreds of MHz.
    Block Diagram -- Digital PreDistortion IP
×
Semiconductor IP