Home automation system design: the basics
Tushar Rastogi and Rahul Raj Sharma (Cypress Semiconductor)
embedded.com (June 11, 2014)
Home automation is a method of controlling home appliances automatically for the convenience of users. This technology makes life easier for the user, and saves energy by utilizing devices according to strict requirements. Controls can be as basic as dimming lights with a remote or as complex as setting up a network of items in the home that can be programmed using a main controller or even via cell phone from anywhere in the world.
A home automation system can involve switching off electrical appliances like air-conditioners or refrigerators when a desired temperature has been reached, then switching on again when the temperature has crossed a certain value. A home automation system can also be used to secure a house from burglars by sending alerts to the nearest police station and the homeowner in case a trespasser is sensed.
Related Semiconductor IP
- HBM4 PHY IP
- Ultra-Low-Power LPDDR3/LPDDR2/DDR3L Combo Subsystem
- MIPI D-PHY and FPD-Link (LVDS) Combinational Transmitter for TSMC 22nm ULP
- HBM4 Controller IP
- IPSEC AES-256-GCM (Standalone IPsec)
Related Articles
- System Verilog Macro: A Powerful Feature for Design Verification Projects
- Differentiation Through the Chip Design and Verification Flow
- System on Modules (SOM) and its end-to-end verification using Test Automation framework
- Four ways to build a CAD flow: In-house design to custom-EDA tool
Latest Articles
- A 14ns-Latency 9Gb/s 0.44mm² 62pJ/b Short-Blocklength LDPC Decoder ASIC in 22FDX
- Pipeline Stage Resolved Timing Characterization of FPGA and ASIC Implementations of a RISC V Processor
- Lyra: A Hardware-Accelerated RISC-V Verification Framework with Generative Model-Based Processor Fuzzing
- Leveraging FPGAs for Homomorphic Matrix-Vector Multiplication in Oblivious Message Retrieval
- Extending and Accelerating Inner Product Masking with Fault Detection via Instruction Set Extension