Best-in class switching regulators, from Dolphin Integration, reaching 90% efficiency
Grenoble, France - November 11, 2011 -- Dolphin Integration unveil two new members of their panoply of embedded power-supply regulators. Both of these are switching regulators targeting applications requiring high conversion efficiency: more than 90% when the average current is above 10% of the maximum value.
They offer a programmable output voltage between 0.8 V and 3.3 V to drive diverse logic or analog embedded circuitry and they grant compatibility with lithium-ion batteries, 2xAA batteries, power rails, USB interfaces.
Each regulator is configurable to fit the maximum current it must supply, up to 600 mA with internal transistors and up to 5 A with external transistors, to minimize silicon area. It also features fully-integrated active compensation, which limits the bill-of-material to one inductor and one capacitor, with no need for resistors being.
These regulators are first available in 180 nm process and readily extended to other processes.
Ask for more information on product performances and key features, please click here
About Dolphin Integration
Dolphin Integration is up to their charter as the most adaptive and lasting creator in the Microelectronics Design Industry to "enable mixed signal Systems-on-Chip". It stars a quality management stimulating reactivity for innovation as well as independence and partnerships with Foundries. Their current mission is to supply worldwide customers with fault-free, high-yield and reliable sets of CMOS Virtual Components. The strategy is to follow product launches with evolutions addressing future needs, emphasizing resilience to noise and drastic reductions of power-consumption at SoC level, thanks to their own missing EDA solutions enabling Integration Hardware Modeling (IHM) and Application Hardware Modeling (AHM) as well as early Power and Noise assessment, plus engineering assistance for Risk Control.
For more information about Dolphin, visit: www.dolphin-integration.com
Related Semiconductor IP
- 5A DCDC, 0.60...1.43V switching regulator using COT switch mode, Vin=4.25...15V
- Low-BoM, inductor-based buck switching regulator with high efficiency, full PWM mode
- Switching regulator, inductor-based, PWM mode, high efficiency
- Switching regulator, inductor-based, PWM mode, high efficiency
- Low-BoM, inductor-based buck switching regulator with high efficiency, full PWM mode design in TSMC 40 ULP
Related News
- Infineon Technologies Licenses MIPS Technologies 64-Bit Core For Use In Next Generation IADs And LAN Switching System-On-a-Chip Solutions
- Exbit Uses Synopsys' New Licensing Model to Accelerate Development of Gigabit and 10 Gigabit Switching Technology
- Internet Machines Selects TriCN I/O Interface Technology for its Network Processing, Traffic Management, and Switching Semiconductors
- NComm Releases First Standard Automatic Protection Switching (APS) Product for SONET Transport
Latest News
- 10xEngineers and Andes Enable High-Performance AI Compilation for RISC-V AX46MPV Cores
- GUC Announces Tape-out of UCIe 64G IP on TSMC N3P Technology
- Caspia Launches New RTL Security Analyzer Enabling Agentic Silicon Security Verification
- Europe’s stealth leading-edge process technology
- Combined CapEx of Top Eight CSPs to Exceed $710 Billion in 2026; Google Leads ASIC Deployment with TPUs