SATA IP for UMC

Compare 13 SATA IP for UMC from 5 vendors (1 - 10)

Serial ATA (SATA) PHY Transceiver IP
- SMS6000 is a fully integrated CMOS transceiver that handles the low level Serial ATA protocol and signaling.
- It contains all necessary Clock synthesis, Clock Recovery, Serializer, Deserializer, Comma detect for 8B/10B encoded data and Frame alignment functionalities.
SATA 6G PHY in UMC (40nm, 28nm, 22nm)
- Compliant with SATA/eSATA v3.3, AHCI v1.3 and SATA PIPE v4.3 specifications
- AMBA 2.0 AHB and AMBA 3 AXI subsystem interfaces
- AMBA 4 AXI and ACE-Lite bus interfaces
- Memory data protection and memory address parity protection
SATA 6G PHY
- ? 6-Gbps transmission rate through standard SATA cable
- ? Spread-spectrum clock (SSC) generation and absorption
- ? Programmable down-spread (+4,980 ppm through -4,980 ppm)
- ? Fully clock-forwarded transceiver interface, configurable using soft PMA layer above hard macro PHY
Serial ATA PHY
- 1.5 / 3.0 Gbps
- Complies with SATA 3.0 Specification
SATA II PHY IP, UMC 55nm SP process
SATA III PHY IP, Gen-3, UMC 55nm SP process
SATA III PHY IP, Gen-3, UMC 0.11um HS/FSG process
SATA II PHY IP, Gen-2, UMC 90nm SP process
SATA II PHY IP, Gen-2, UMC 0.13um HS/FSG process
SATA II PHY IP, Gen-2, UMC 0.11um HS/AE process