NFC IP for SMIC

Welcome to the ultimate NFC IP for SMIC hub! Explore our vast directory of NFC IP for SMIC
All offers in NFC IP for SMIC
Filter
Filter

Login required.

Sign in

Login required.

Sign in

Compare 6 NFC IP for SMIC from 1 vendors (1 - 6)
  • NFC-V tag IP supporting ISO15693-3
    • The 180SMIC_NFCV_01 is a tag IC that works with NFCV technology.
    • When connected to an antenna designed according to the IC parameters, the tag is able to accumulate energy and exchange information with the reader.
    • The IC is compliant with is ISO/IEC 15693-3 standard and NFC Forum NFC-V.
    Block Diagram -- NFC-V tag IP supporting ISO15693-3
  • NFC wireless interface supporting ISO14443 A and B with EEPROM on SMIC 180nm
    • The IP block provides the physical layer implementation of ISO 14443 interface. In particular, it includes the necessary functional devices for receiving data on the connected antenna, for the response load modulation, received and transmitted data (de)framing and parallel interface to external CPU.
    • This IP also can be used for adding NFC functionality to mobile devices and other applications to perform high-level RFID protocol tasks.
    Block Diagram -- NFC wireless interface supporting ISO14443 A and B with EEPROM on SMIC 180nm
  • NFC wireless interface supporting ISO14443 A and B on SMIC 180nm
    • The IP block provides the physical layer implementation of ISO 14443 interface. In particular, it includes the necessary functional devices for receiving data on the connected antenna, for the response load modulation, received and transmitted data (de)framing and parallel interface to external CPU.
    • This IP also can be used for adding NFC functionality to mobile devices and other applications to perform high-level RFID protocol tasks.
    Block Diagram -- NFC wireless interface supporting ISO14443 A and B on SMIC 180nm
  • UHF RFID tag IP with 512bit EEPROM and -19dBm sensitivity
    • 180SMIC_RFID_EPCGen2_01 IP is intended for use in passive UHF transponder applications.
    • IP derives its operating power from an RF electromagnetic field generated by a reader, which is received and rectified by the IP.
    • The IP tag sends the answer back to the reader using a backscatter modulation technique.
    Block Diagram -- UHF RFID tag IP with 512bit EEPROM and -19dBm sensitivity
  • UHF RFID EPC Gen2V2 physical interface
    • SMIC 180nm EEPROM technology
    • Operating temperature range -40…+85 °C
    • Operating frequency 860 - 960 MHz
    • EPC Class 1 Generation 2 V2 compliant
    • Two pads RF operation functionality
    Block Diagram -- UHF RFID EPC Gen2V2 physical interface
  • UHF RFID tag IC with 3.6kBit EEPROM and -19.5dBm sensitivity
    • GF Embedded EEPROM 130 nm
    • Read sensitivity -19.5 dBm
    • Write sensitivity -17 dBm
    • Impedance 20-j300 Ohm @915 MHz
    Block Diagram -- UHF RFID tag IC with 3.6kBit EEPROM and -19.5dBm sensitivity
×
Semiconductor IP