Wireless IP Cores for GLOBALFOUNDRIES

Compare 12 Wireless IP Cores for GLOBALFOUNDRIES from 5 vendors (1 - 10)

UHF RFID tag IP with 3.6kBit EEPROM and -18dBm sensitivity
- 130GF_RFID_EPCGen2_01 IP is intended for use in passive UHF transponder applications.
- IP derives its operating power from an RF electromagnetic field generated by a reader, which is received and rectified by the IP.
- The tag IP sends the answer back to the reader using a backscatter modulation technique.
Ultra-low-power 2.4 GHz transceiver for Bluetooth 5.3, 802.15.4 and IoT
- The icyTRX ultra-low-power RF transceiver is designed to meet standards such as Bluetooth Low Energy (BLE), 802.15.4 PHY Layer (e.g. ZigBee), and proprietary standards with data rates from 62.5 kBit/s up to 4 Mbit/s.
- icyTRX offers 5.3 mW consumption in receive mode from a 1.0 V supply. icyTRX is a complete transceiver that is designed for miniaturization, yielding an area of analog RF of less than 1 mm2 in 55 nm CMOS, requiring minimal external components thanks to high degree of integration. icyTRX is designed for easy integration into ASICs and SoCs.
802.11ah IP - GLOBALFOUNDRIES 22nm FDX
- Process Technology: GLOBALFOUNDRIES 22nmFDX
- Operation voltage: core 0.8v, I/O 1.8v
- Operation Band: 863MHz ~ 928MHz
- Power and clock blocks are integrated in IP
GNSS RF IP - GLOBALFOUNDRIES 22nm FDX
- Process Technology: GLOBALFOUNDRIES 22nmFDX
- Supply voltage: 0.9 ~1.8v
- Operating temperature: -40°C to 85°C
- Support frequency bands: GPS L1, Beidou B1, Galileo E1, Glonass G1, configurable to support L2 and L5
- Configurable IF Bandwidth
Dual-mode Bluetooth RF IP
- Process Technology: GLOBALFOUNDRIES 22nmFDX
- Supply voltage: 1.5 ~1.8v
- Operating temperature: -40°C to 85°C
- Support 6 modes including BT BR/EDR2M/EDR3M and BLE 1M/2M, Coded PHY S2/S8
UHF RFID EPC Gen2 physical interface
- Global Foundries Embedded EEPROM 130nm
- Operating temperature range -40…+85 °C
- 2 operation modes: Passive mode and Battery assisted passive (BAP) mode
- Operating frequency 860 - 960 MHz
0.8 to 2.5GHz full wave rectifier with ESD protection
- GF 130nm Embedded EEPROM technology process
- Input voltage limit with up to 20mA shunt capability
UHF RFID EPC Gen2 physical interface
- Global Foundries Embedded EEPROM 0.13 um
- Operating temperature range -40…+85 °C
802.11 A/B/G/N Direct Conversion Transceiver
- Fully Integrated 802.11 a/b/g/n Transceiver
- High Performance
- Low Power Consumption
802.15.4 (Zigbee, 6LoWPAN, RF4CE, ISM) PHY
- Fully Integrated 802.15.4 Transceiver
- High Performance
- Low Power Consumption