PLL IP for GLOBALFOUNDRIES
Welcome to the ultimate PLL IP for GLOBALFOUNDRIES hub! Explore our vast directory of PLL IP for GLOBALFOUNDRIES
All offers in
PLL IP
for GLOBALFOUNDRIES
Filter
Compare
40
PLL IP
for GLOBALFOUNDRIES
from 5 vendors
(1
-
10)
Filter:
- 12nm
-
High Performance Fractional-N RF Frequency Synthesizer PLLs for 5G, WiFi, etc
- Fractional-N digital PLL architecture, using an LC-tank oscillator
-
Low Voltage, Low Power Fractional-N PLLs
- Low power, suitable for IoT applications
- Good jitter, suitable for clocking digital logic.
- Extremely small die area (< 0.005 sq mm), using a ring oscillator
- Output frequency can be from 1 to 400 times the input reference, up to 1.5GHz
-
Fractional-N PLL for Performance Computing in GlobalFoundries 12LPP/14LPP
- Low jitter, suitable for many clocking applications, including high speed digital, ADC, DAC, medium-speed PHY
- Extremely small die area (< 0.004 sq mm), using a ring oscillator
- Output frequency can be from 1 to 400 times the input reference, up to 4GHz
- Reference clock from 10MHz to 500MHz
-
General Purpose Fractional-N PLLs
- Low power, suitable for logic clocking applications
- Extremely small die area, using a ring oscillator
- Twelve bits fractional resolution
-
Fractional-N PLLs for Performance Computing
- Low jitter, suitable for many clocking applications, including high speed digital, ADC, DAC, medium-speed PHY
- Extremely small die area (< 0.005 sq mm), using a ring oscillator
- Output frequency can be from 1 to 400 times the input reference, up to 4GHz
- Reference clock from 10MHz to 500MHz
-
FracN/SSCG PLL on GLOBALFOUNDRIES 12LP+
- Electrically Programmable PLL with Fractional-N divider and Spread Spectrum Clock Generation
- Wide Ranges of Input and Output Frequency for diverse clocking needs
- Ability to generate precise system clocks synchronized to track remote sources
- Very fine precision: near 1 part per billion resolution
-
Integrated Droop Response System
- Observable
- Tightly Coupled
- Process Portable
-
Aeonic Generate Clock Generation Module [PLL], 8x smaller than fractional analog solutions
- Process portable
- Proven (65nm to 3nm)
- Full SCAN testable
- Core voltage supply
-
PLL
- Dual power supply: 1.8V (analog) & 0.8V(digital) allow for excellent supply noise rejection
- Input reference clock frequency supports ranging from 10MHz to 500MHz
- PFD frequency supports ranging from 10MHz to 100MHz
- VCO frequency supports ranging from 1GHz to 3.2GHz
-
Wide Range Programmable Integer PLL on GLOBALFOUNDRIES 12LP+
- Electrically Programmable PLL for multiple applications
- Wide Ranges of Input and Output Frequency for diverse clocking needs
- Implemented with Analog Bits’ proprietary architecture
- Fully integrated inside customer-specified IO ring