Using an asymmetric multiprocessor model to build hybrid multicore designs
By Michael Christofferson, Enea Embedded Technology Inc.
Embedded.com
Nov 5 2005 (9:00 AM)
Multiprocessing programming models have been either inefficient in resource utilization or lack determinism, but a new multiprocessing model is now available that can solve both problems for the right applications.
To meet increasing demand for processing power, chip makers have begun to turn away from the traditional 'wider-larger-faster' approach to scaling and turned, instead, to multi-core processing. These devices implement a distributed processing system on a single chip, using multiple processors to gain performance increases. The trouble is, there has not been an efficient multiprocessing programming model that meets the needs of real-time embedded systems. A new approach, asymmetric multiprocessing (AMP), promises to provide a combination of efficiency and determinism for many applications.
Traditional multiprocessing models have been one of two types. The first, symmetric multiprocessing (SMP), uses algorithms that perform dynamic load balancing by allocating software tasks among a number of identical processors to make maximum use of processor resources (see Figure 1 below). The load-balancing algorithms have been developed and refined over many years, and the approach works well for numerically-intensive data processing (number-crunching) applications. A single operating system controls all of the processors.
Embedded.com
Nov 5 2005 (9:00 AM)
Multiprocessing programming models have been either inefficient in resource utilization or lack determinism, but a new multiprocessing model is now available that can solve both problems for the right applications.
To meet increasing demand for processing power, chip makers have begun to turn away from the traditional 'wider-larger-faster' approach to scaling and turned, instead, to multi-core processing. These devices implement a distributed processing system on a single chip, using multiple processors to gain performance increases. The trouble is, there has not been an efficient multiprocessing programming model that meets the needs of real-time embedded systems. A new approach, asymmetric multiprocessing (AMP), promises to provide a combination of efficiency and determinism for many applications.
Traditional multiprocessing models have been one of two types. The first, symmetric multiprocessing (SMP), uses algorithms that perform dynamic load balancing by allocating software tasks among a number of identical processors to make maximum use of processor resources (see Figure 1 below). The load-balancing algorithms have been developed and refined over many years, and the approach works well for numerically-intensive data processing (number-crunching) applications. A single operating system controls all of the processors.
To read the full article, click here
Related Semiconductor IP
- ReRAM NVM in DB HiTek 130nm BCD
- UFS 5.0 Host Controller IP
- PDM Receiver/PDM-to-PCM Converter
- Voltage and Temperature Sensor with integrated ADC - GlobalFoundries® 22FDX®
- 8MHz / 40MHz Pierce Oscillator - X-FAB XT018-0.18µm
Related Articles
- Using scheduled cache modeling to reduce memory latencies in multicore DSP designs
- Building security into an AI SoC using CPU features with extensions
- Leveraging IBIS-AMI Models to Optimize PCIe 6.0 Designs
- Using PSS and UVM Register Models to Verify SoC Integration
Latest Articles
- An FPGA-Based SoC Architecture with a RISC-V Controller for Energy-Efficient Temporal-Coding Spiking Neural Networks
- Enabling RISC-V Vector Code Generation in MLIR through Custom xDSL Lowerings
- A Scalable Open-Source QEC System with Sub-Microsecond Decoding-Feedback Latency
- SNAP-V: A RISC-V SoC with Configurable Neuromorphic Acceleration for Small-Scale Spiking Neural Networks
- An FPGA Implementation of Displacement Vector Search for Intra Pattern Copy in JPEG XS