How to build reliable FPGA memory interface controllers without writing your own RTL code!
What if a designer could simply use a GUI to input the memory system parameters and generate RTL code for use in an FPGA without writing it from scratch?
As FPGA designers strive to achieve higher performance while meeting critical timing margins, one consistently vexing performance bottleneck is the memory interface. Today's more advanced FPGAs provide embedded blocks in every I/O that make the interface design easier and more reliable. These I/O elements are building blocks that, when combined with surrounding logic, can provide the designer with a complete memory interface controller. Nonetheless, these I/O blocks – along with extra logic – must be configured, verified, implemented, and properly connected to the rest of the FPGA by the designer in the source RTL code.
But, what if these difficult tasks were taken care of by the FPGA vendor? What if a designer could simply use a GUI to input the memory system parameters and generate RTL code without writing it from scratch? Finally, what if the physical layer interface was based on hardware verified designs? All this is now possible using the Memory Interface Generator (MIG) from Xilinx. This "How To" article will discuss the various memory interface controller design challenges and how to use the MIG to build a complete memory interface solution for your own application on a Virtex-4 FPGA.
To read the full article, click here
Related Semiconductor IP
- CAN XL Verification IP
- Rad-Hard GPIO, ODIO & LVDS in SkyWater 90nm
- 1.22V/1uA Reference voltage and current source
- 1.2V SLVS Transceiver in UMC 110nm
- Neuromorphic Processor IP
Related White Papers
- Building high-speed FPGA memory interfaces
- Build Complex ASICs Without ASIC Design Expertise, Expensive Tools - Take advantage of an architecture comparable to your original FPGA prototype design by migrating to a structured ASIC
- FPGA Prototyping of Complex SoCs: RTL code migration and debug strategies
- How to use the CORDIC algorithm in your FPGA design
Latest White Papers
- OmniSim: Simulating Hardware with C Speed and RTL Accuracy for High-Level Synthesis Designs
- Balancing Power and Performance With Task Dependencies in Multi-Core Systems
- LLM Inference with Codebook-based Q4X Quantization using the Llama.cpp Framework on RISC-V Vector CPUs
- PCIe 5.0: The universal high-speed interconnect for High Bandwidth and Low Latency Applications Design Challenges & Solutions
- Basilisk: A 34 mm2 End-to-End Open-Source 64-bit Linux-Capable RISC-V SoC in 130nm BiCMOS