Understanding Skew in 100GBASE-R4 applications
Tim Warland, AppliedMicro
EETimes (12/14/2011 3:35 PM EST)
The 100GBASE-R4 physical layer device converts 10-lanes running 10Gbps (CAUI) to 4-lanes running 25Gbps. The conversion process is data agnostic with no provision for rate adaptation, consequently skew management is an integral part of end-to-end system performance.
Recently ratified, the 100Gigabit Ethernet Standard, (IEEE802.3ba) defines a 100GBASE-LR4 and 100GBASE-ER4 interface for optical interfaces on single-mode fiber. The architecture includes the Physical Coding sub layer (PCS), connected on one side to the reconciliation sub-layer (RS) and MAC and to the PMA/PMD on the other side. Actually implementations are more likely to combine the PCS and PMA with the RS and MAC and interface to a second PMA and PMD (referred to as the PHY)
To read the full article, click here
Related Semiconductor IP
- NPU IP Core for Mobile
- MSP7-32 MACsec IP core for FPGA or ASIC
- UHF RFID tag IP with 3.6kBit EEPROM and -18dBm sensitivity
- NPU IP Core for Edge
- Specialized Video Processing NPU IP
Related White Papers
- Timing Optimization Technique Using Useful Skew in 5nm Technology Node
- Signal skew managed dynamically
- Understanding virtualization facilities in the ARMv8 processor architecture
- Design patterns in SystemVerilog OOP for UVM verification
Latest White Papers
- Ramping Up Open-Source RISC-V Cores: Assessing the Energy Efficiency of Superscalar, Out-of-Order Execution
- Transition Fixes in 3nm Multi-Voltage SoC Design
- CXL Topology-Aware and Expander-Driven Prefetching: Unlocking SSD Performance
- Breaking the Memory Bandwidth Boundary. GDDR7 IP Design Challenges & Solutions
- Automating NoC Design to Tackle Rising SoC Complexity