Custom Corner Characterization for Optimal ASIC/SoC Designs
Naveen Narang & Venkata Krishna, Open-Silicon
EETimes (5/25/2016 05:50 PM EDT)
Today's characterization tools offer a very good solution for extracting the best performance out of an ASIC/SoC for any specified PVT operating conditions.
A typical corner (TT) is no longer typical for most applications in today's world. For that matter, standard PVT Corners (FF/TT/SS), generally, do not represent the exact environmental conditions in which an ASIC/SoC will be functioning. This means the voltage may not be a nominal Vdd in a typical case or Vdd±10% in an extreme case; and the temperature may not be 25C in a typical case or 125C/-40C in extreme cases. Also, in today's market, every µW of power saved, and nS of delay avoided, makes a significant difference in a product's performance and cost. Therefore, it is important to know how a system behaves under real-time PVT conditions. One needs to characterize foundation IPs at these special (custom) corners to avoid overdesign and achieve optimal product for best power and performance.
When estimating the power and timing numbers of an IP at a custom corner (e.g., @95C and Vdd+3%), it is not easy to derive values from regular SS, TT, and FF characteristics as these may not support linear extrapolations. Even small errors in calculation can be very risky. One approach is to use characterization tools (e.g., Silicon Smart from Synopsys) that can easily characterize foundation IPs to estimate power and performance of an SoC at any custom corner with substantial accuracy using reference ".lib" files.
To read the full article, click here
Related Semiconductor IP
- CXL 3 Controller IP
- PCIe GEN6 PHY IP
- FPGA Proven PCIe Gen6 Controller IP
- Real-Time Microcontroller - Ultra-low latency control loops for real-time computing
- AI inference engine for real-time edge intelligence
Related White Papers
- Optimal OTP for Advanced Node and Emerging Applications
- Why Transceiver-Rich FPGAs Are Suitable for Vehicle Infotainment System Designs
- Why Transceiver-Rich FPGAs Are Suitable for Vehicle Infotainment System Designs
- Using sub-RISC processors in next generation customizable multi-core designs: Part 1
Latest White Papers
- Adaptable Hardware with Unlimited Flexibility for ASIC & SoC ICs
- CAST Provides a Functional Safety RISC-V Processor IP for Microchip FPGAs
- Design and Implementation of Test Infrastructure for Higher Parallel Wafer Level Testing of System-on-Chip
- Soft Tiling RISC-V Processor Clusters Speed Design and Reduce Risk
- 8051s in Modern Systems: Interfacing to AMBA Buses