SDR RF IP, 100MHz-2.6GHz, for ultra-low power applications from IoT, M2M to 5G available from T2MIP
Munich – October 29, 2020 – T2MIP, the global independent semiconductor IP Cores & Technology provider, is pleased to announce the availability of a unique 3rd Generation SDR RF IP in TSMC40ULP with a contiguous frequency range from 100MHz-2.6GHz for ultra-low power IOT applications. The SDR RF IP integrates all the necessary RF/analog/mixed-signal/digital functions to support radio functions for most standards operating in this frequency range at low-cost and ultra-low-power
This 3rd Generation SDR RF IP family can receive most wireless standards in the frequency range including: 5G, Wi-Fi, LTE, NB-IoT, Cat-M, 802.15.4g, 802.11ah, Bluetooth, LORA, GNSS among others. This ultra-low-power SDR RF transceiver IP enables a completely flexible, standard agnostic, Internet-of-Things (IoT) and Machine-to-Machine (M2M) SoC.
The receive path (RX) has an extremely high dynamic range and is implemented with direct-conversion architecture without external SAW filter. A direct conversion TX generates low EVM signals to drive the external power amplifier. An integrated Frac-N frequency synthesizers and LO-chains generate the required low phase-noise LO signals for TX and RX mixers. Support for both FDD and TDD modes along with integrated ADC/DACs (up to 80Msps) with 1x1 MIMO configuration. The IP has low receiver power of 10mW and has an option for the integrated LDOs. The IP is silicon proven in TSMC 40ULP.Optional fully integrated power management can be integrated to minimize the module e-BOM cost.
T2MIP also carries a range of silicon & system proven modem digital and SW IP to address individual wireless standards including: NB-IOT, 4G Ue/eNodeB, 5G NR including massive MiMo, Bluetooth, ZigBee, WiFi, GNSS.
The addition of this SDR RF IP to T2MIP’s portfolio will enable customers to enter and grow in the niche market. The other siblings of the 3rd Generation SDR IP and a roadmap for 5G and beyond are –
- SDR 4th Gen: TSMC22, 200MHz - 7.3GHz, TDD/FD-FDD, (under development, sampling 2022)
- SDR 2nd Gen: TSMC65, 2x2, 100kHz-3.8GHz, up to 120MHz bandwidth, 160/640 MSPS ADC/DAC, FD-FDD
- SDR 1st Gen: TSMC65, 1x2 300MHz – 2.8GHz, up to 40MHz bandwidth, up to 160/640MSPS ADC/DAC
Availability: This SDR RF IP is available for immediate licensing stand alone or with the matching digital modems. For more information on licensing options and pricing please drop a request to contact@t-2-m.com.
About T2M: T2MIP is the global independent semiconductor technology provider, supplying complex IP Cores, software, KGD and disruptive technologies enabling accelerated production of Wireless, Audio, IoT and Consumer SoCs. For more information, please visit: https://t-2-m.com/semiconductor-ip-core/cellular-ip/sdr-ip/sdr-100mhz-2-6ghz-rf-gen3-silicon-proven-ip-core
Related Semiconductor IP
- M’ary Quadrature Amplitude Modulator IP in VHDL, FPGA and SDR
- MIPI-I3C HOST (SDR)
- Complete memory system supporting any combinations of SDR SDRAM, DDR, DDR2, Mobile SDR, FCRAM, Flash, EEPROM, SRAM and NAND Flash, all in one IP core
Related News
- T2M-IP Announces Silicon-Proven MIPI D-PHY v2.5 Tx and DSI-2 Tx Controller Low-Power, Cost-Effective IP Cores Solutions for Advanced SoCs
- Siemens delivers AI- accelerated verification for analog, mixed-signal, RF, memory, library IP and 3D IC designs in Solido Simulation Suite
- T2M-IP Unveils MIPI D-PHY v2.5 Tx and DSI Tx Controller v1.2: Silicon-Proven, Low-Power, Cost-Effective IP Core Solutions for Advanced SoCs
- Bluetooth® V6.0 Channel Sounding RF Transceiver IP Core in 22nm & 40nm for ultra-low power distance aware Bluetooth connected devices
Latest News
- HPC customer engages Sondrel for high end chip design
- PCI-SIG’s Al Yanes on PCIe 7.0, HPC, and the Future of Interconnects
- Ubitium Debuts First Universal RISC-V Processor to Enable AI at No Additional Cost, as It Raises $3.7M
- Cadence Unveils Arm-Based System Chiplet
- Frontgrade Gaisler Unveils GR716B, a New Standard in Space-Grade Microcontrollers