Digital Core Design (DCD) Announces New Configurable CAN Bus Controller
– The Intellectual Property (IP) provider - Digital Core Design (DCD) today has announced the release of the DCAN – Configurable CAN Bus Controller IP Core.
The DCAN is a stand-alone controller for the Controller Area Network (CAN) widely used in automotive and industrial applications. DCAN conforms to Bosch CAN 2.0B specification (2.0B Active). Core has simple configurable CPU interface which allows to operate with 8, 16 and 32 Bit CPU with little endian or big endian adressing scheme. DCAN supports both standard (11 bit identifier) and extended (29 bit identifier) frames. Hardware message filtering and 64 byte receive FIFO enables back-to-back message reception with minimum CPU load. The DCAN is designed in pure HDL languages allowing targeting in FPGA or ASIC technologies.
The Customer can select VHDL/Verilog source code or FPGA Netlists. IP Core is licensed under Single Design or Unlimited Designs options. If you have any questions, please feel free to contact DCD. http://www.dcd.pl/acontact.php
For more information about this product please check:
DCAN – Configurable CAN Controller
About Digital Core Design
Digital Core Design (DCD) is a private Intellectual Property (IP) Core provider and System-on-Chip (SoC) design house, an expert in IP cores architecture improvements. DCD sells its products and services directly and through its global distribution network. DCD offers VHDL and Verilog high performance and synthesizable IP cores for a speed optimized 8-, 16- and 32-bit processors, peripherals, serial interfaces, floating point arithmetic units and coprocessors. The functionality of IP solutions offered by DCD were up to date appreciated by over 200 licenses sold to over 150 customers worldwide, such as: INTEL, SIEMENS, PHILIPS, TOYOTA, MAXIM, RAYTHEON, OSRAM, GENERAL ELECTRIC, FARADAY, SAGEM, FLEXTRONICS and GOODRICH. DCD also became a member of first-class branch partner programs like: AMPP of ALTERA, AllianceCORE of XILINX, ispLeverCORE Connection of LATTICE and IP Catalyst of SYNOPSYS. For more information, please visit: http://www.dcd.pl.
Related Semiconductor IP
- 1-port Receiver or Transmitter HDCP 2.3 on HDMI 2.1 ESM
- HDMI 2.0/MHL RX Combo 1P PHY 6Gbps in TSMC 28nm HPC 1.8V, North/South Poly Orientation
- HDMI 2.0 RX PHY in SS 8LPP 1.8V, North/South Poly Orientation
- HDMI 2.0 RX Controller with HDCP
- HDMI 2.0 RX 4P PHY 6Gbps in TSMC 28nm HPM 1.8V, North/South Poly Orientation
Related News
- Digital Core Design in cooperation with DCD-SEMI Unveils DCAN-XL: Revolutionary CAN XL IP Core Bridging the Gap Between CAN FD and Ethernet
- DCD celebrates 25 years
- DDMA, multi-channel DMA Controller IP core from DCD-SEMI
- DCAN FD, A Configurable CAN Bus Controller with Flexible Data-Rate Targets Autonomous Cars & ADAS Systems
Latest News
- Cerebras Appoints Tom Lantzsch to Board of Directors
- HPC customer engages Sondrel for high end chip design
- PCI-SIG’s Al Yanes on PCIe 7.0, HPC, and the Future of Interconnects
- Ubitium Debuts First Universal RISC-V Processor to Enable AI at No Additional Cost, as It Raises $3.7M
- Cadence Unveils Arm-Based System Chiplet