power management IP
Filter
Compare
1,174
IP
from 114 vendors
(1
-
10)
-
NFC Power Management Unit (0.6/1.2/1.5 V output voltage, 10/20/50 uA output current, 2 MHz output clock frequency)
- 0.6/1.2/1.5 V output voltage, 10/20/50 uA output current, 2 MHz output clock frequency
- GF 130nm Embedded EEPROM technology process
- Reverse current protection
-
Power management unit (0.9V, 1.8V, 3.3V output voltages, 1.2V reference voltage and 10uA/1uA reference currents)
- TSMC 28nm eFlash technology
- Bandgap output voltage 1.2V
- Bandgap output voltage accuracy without trimming ±3% @5.0V
-
Power Management Subsystem
- The agilePMU Subsystem is an efficient and highly integrated Power Management Unit for SoCs/ASICs.
- Featuring a Power-On-Reset (POR), multiple Low Drop-Out (LDO) regulators, and an associated reference generator.
- The agilePMU Subsystem is designed to ensure low power consumption while providing optimal power management capabilities.
-
NFC Power Management Unit (1.08 – 1.32 V output voltage, 50 nA output current)
- Global Foundries Embedded EEPROM 0.13 um
- Input voltage limit with up to 50 mA shunt capability
- Reverse current protection
- Low drop out voltage regulator (capless solution)
-
SMIC 0.13um Power Management Kit,1.2v operating voltage
- SMIC 0.13um Logic 1P8M 1.2V/3.3V process
- Wide Variety of Cell Functions and Drive Strengths
- Special Cell Library for Low Power Design
- Support for Synopsys UPF Flow
-
HHGrace 0.11um ULL 7track Power Management Kit
- HHGrace 0.11um Low Leakage
- Wide Variety of Cell Functions and Drive Strengths
- Process-Specific Optimization for Ultra High-Density and Low-Power
- Special Cell Library for Low Power Design
-
HHGrace 0.11um ULL MVT 7track Power Management Kit
- HHGrace 0.11um Low Leakage
- Wide Variety of Cell Functions and Drive Strengths
- Process-Specific Optimization for Ultra High-Density and Low-Power
- Special Cell Library for Low Power Design
-
Power Management IC - I3C Basic Interface IP
- Power Management IC (PMIC) is designed for DDR5 RDIMM, DDR5 LRDIMM, DDR5 NVDIMM application
- PMIC is used for switching and LDO regulators
- PMIC-I3C Interface used to select suitable power fit for various application environment
- PMIC device is intended to operate up to 12.5MHz
-
Power management unit
- Global Foundries CMOS 55 nm
- Input Voltage Range: +1.6V to +3.6V
- Adjustable Output Voltage
-
Power Management Unit
- iHP SG25H4 SiGe BiCMOS 0.25 um
- Bandgap voltage source 1.12V
- Low drop out voltage regulator
