IP Catalog > SDIO Card Controller

SDIO Card Controller IP

Filter
Filter

Login required.

Sign in

Search (27)
Compare 27 IP from 8 vendors (1 - 10)
  • SD Card Input/Output Protocol Controller
    • Compliance with Embedded MultiMediaCard System Specification Version 4.51. Card support for three different databus modes: 1-bit (default), 4-bit and 8-bit
    • Full compatibility with previous versions of MultiMediaCards (backward compatibility)
    • Full compliance with SD memory card specifications version 4.2 ( SPI mode and UHS-II mode not supported)
  • SD Host Controller IP, SD host spec. v3.0, SDIO spec. v2.0, MMC spec. v4.3, Supports UHS50/UHS104 card, Soft IP
  • SD Card / SDIO Card Combo Device IP
    • SD / SDIO Card Combo Device IP core is SD memory controller and a SDIO controller with an AHB interface.
    • Combining with the optional NAND Flash Controller IP, the SD/SDIO Combo Device IP provides an integrated SD memory Card solution for designs that utilize NAND flash memory.
    Block Diagram -- SD Card / SDIO Card Combo Device IP
  • SDIO Card Device IP
    • The SDIO Card Device IP core is used to implement SDIO cards that are connected to a Host processor over a standard SD bus. The flexible architecture of the SDIO Device IP core is targeted to develop a range of portable, low-power cards such as the WiFi (802.11), GPS, WiMAX, UWB, LTE.
    • The SDIO Card Device IP core is fully compliant with the SD Specification Part E1 SDIO 3.0. It supports SPI, SD1, and SD4 bit transfer modes, and multiple functions per card. High-speed and full-speed SD data transfers are also supported.
    Block Diagram -- SDIO Card Device IP
  • SD/SDIO 3.0 Card Controller
    • Compatible with SD/SDIO specification 3.0 with 1 and 4 bit data transfer.
    • Option to support MMC 4.2 with 8-bit data width.
    • Support SD, SPI and optional MMC bus protocol.
    • Support standard capacity, high capacity (SDHC) and extended capacity (SDXC) memory cards.
    Block Diagram -- SD/SDIO 3.0 Card Controller
  • SD Card Host Controller IP
    • The SD Card Host IP f is a highly integrated host controller IP solution that supports three key memory card I/O technologies:
    • The SD Card Host IP handles all of the timing and interface protocol requirements to access these media as well as processing the commands in hardware thereby scaling in both performance and access speeds.
    Block Diagram -- SD Card Host Controller IP
  • Simulation VIP for SD CARD and SDIO
    • SD Card device standard
    • Speed Range A and B
    • Default Speed Range A and faster Range B support
    • PHY-LINK I/F
  • SDIO Host Controller IIP
    • Compliant with SD Host Controller Specification version 4.0
    • Compliant with Part E1 SDIO specification 4.10
    • Supports SDMA, ADMA2 and ADMA3 modes
    • Supports 1-bit, 4-bit bus mode and SPI Bus mode
    Block Diagram -- SDIO Host Controller IIP
  • SDIO Device Controller IIP
    • Compliant with Part 1 Physical Layer Specification Version 3.01 and earlier versions
    • Compliant with Part E1 SD Specification version 3.00 and earlier versions
    • Supports all commands/response types
    • Supports 1-bit, 4-bit ,8 bit SD bus mode and SPI Bus mode
    Block Diagram -- SDIO Device Controller IIP
  • SDIO Slave Controller
    • Compliant with SD Physical Specification Version 2.00 and SDIO Specification Version 2.00.
    • Supports SPI, 1-bit and 4bit SD modes.
    • Supports SDIO Interrupt feature.
    • Supports all mandatory SDIO Commands/Response types
    Block Diagram -- SDIO Slave Controller
×
Semiconductor IP