DDR4 Controller IP

Compare 47 DDR4 Controller IP from 12 vendors (1 - 10)

DDR3 and DDR4 Controller and PHY on TSMC 12nm
- This DDR3/4 IP combo solution presented, is meticulously designed for high performance and low power consumption, utilizing sophisticated architecture and advanced technology.
- Fabricated in TSMC’s 12nm CMOS process, this solution includes both controller and PHY IPs, providing comprehensive support for DDR3 and DDR4 memory interfaces.
DDR4 Controller
- Maximizes bus efficiency via look-ahead command processing, bank management, auto-precharge and additive latency support
- Latency minimized via parameterized pipelining
- Achieves high clock rates with minimal routing constraints
- Supports half-rate and quarter-rate clock operation
- Supports DDR4 SDRAM 3DS device configurations
DDR4 Controller - Validates memory compliance, optimizes performance, ensures reliability
- The DDR4 Memory Controller Verification IP ensures compliance with DDR4 standards, validating high-speed data transfer, read/write operations, and error correction. It provides automated testing, advanced debugging tools, and scalability for complex memory systems.
- Designed for versatile applications, this IP optimizes performance in gaming consoles, data centers, AI systems, networking devices, and more. It ensures memory reliability, efficiency, and scalability across industries, accelerating time-to-market for DDR4-based products
DDR4 IP solution
- Compatible with DDR4 up to 3200Mbps
- AXI compliant multi-ports, and data width, FIFO depth, command queue depth configurable
- DFI compliant interface between controller and PHY
- Support ECC (error correcting code)
Simulation VIP for DDR4 LRDIMM
- DIMM Types
- DDR4 UDIMM, RDIMM, LRDIMM, DDR4 3DS, 3DS UDIMM, 3DS RDIMM, and 3DS LRDIMM
- LRDIMM Training Modes
- Fully supports DWL, HWL, MREP, MRD, and MWD Training modes
Simulation VIP for DDR4
- Data Width, Density
- 4, 8, and 16. 2 Gb to 16 Gb
- Speed
- 1600, 1866, 2133, 2400, 2666, and 3200
QDR4 Synthesizable Transactor
- Supports 100% of QDR4 protocol standard CY7C4142KV13
- Supports 144-Mbit density (8M × 18, 4M × 36)
- Supports eight-bank architecture enables one access per bank per cycle
- Supports two-word burst on all accesses
GDDR4 Synthesizable Transactor
- Supports 100% of GDDR4 protocol standard GDDR4Spec rev 04
- Supports all the GDDR4 commands as per the specs
- Supports all types of timing and protocol violation detection
- Supports all mode registers programming
DDR4 DFI Synthesizable Transactor
- Compliant with DFI version 3.0 or higher Specifications.
- DFI-DDR4 Applies to :
- DDR4 protocol standard JESD79-4, JESD79-4A, JESD79-4A_r2,JESD79-4B, JESD79-4C and JESD79-4D (draft) Specification
- Supports all Interface Groups.
DDR4 3DS Synthesizable Transactor
- Supports 100% of DDR4 3DS protocol standard JESD79-4-1, JESD79-4-1A and JESD79-4-1B
- Supports all the DDR4 3DS commands as per the specs
- Supports up to 16 GB device density
- Supports X4 and X8 devices types