IP Catalog > Interface IP Cores > USB IP > USB On-The-Go IP > USB On-The-Go Controller IP

USB On-The-Go Controller IP

Welcome to the ultimate USB On-The-Go Controller IP hub! Explore our vast directory of USB On-The-Go Controller IP
All offers in USB On-The-Go Controller IP
Filter
Filter

Login required.

Sign in

Search (7)
Compare 7 USB On-The-Go Controller IP from 7 vendors (1 - 7)
  • USB 2.0 On-The-Go (USB20OTG)
    • The USB 2.0 On-The-Go (OTG) IP Core is a 32-bit Avalon interface compliant core and supports ULPI interface.
    • It supports both USB Host and USB Device peripheral functionality.
    • While acting as USB Host, it supports High Speed (HS), Full Speed (FS) and Low Speed (LS) modes.
    • While acting as USB Device peripheral, it supports High Speed (HS) and Full Speed (FS) modes.
    Block Diagram -- USB 2.0 On-The-Go (USB20OTG)
  • USB2.0 On-The-Go IP Core
    • The host/device (OTG) solutions include a variety of host device configurations around a single USB port.
    • OTG is a supplement to the USB 2.0 specification mainly introduced to provide a low‐cost connectivity for portable devices such as mobile phones.
    Block Diagram -- USB2.0 On-The-Go IP Core
  • USB 2.0 On-The-Go IP Core, Compliance Certified
    • A ‘Dual-Role’ USB 2.0 On-The-Go IP Core that operates as both an USB 2.0 peripheral or as an USB 2.0 OTG host in a point-to-point communications with another USB device.
    • The USB OTG IP Core is fully USB 2.0 and USB 2.0 On-The-Go Supplement compliant.
    Block Diagram -- USB 2.0 On-The-Go IP Core, Compliance Certified
  • USB 3.0 OTG High / Full / Low- Speed Dual Role IP Core
    • Support SW controlled host/device role switching.
    • Support Superspeed, Highspeed and Fullspeed
    • Support Control, Bulk, Interrupt and Isochronous Transfer Types
    • Support U1/U2/U3 power saving modes for USB 3.x port
    Block Diagram -- USB 3.0 OTG High / Full / Low- Speed Dual Role IP Core
  • USB2.0 OTG
    • LTTS USB 2.0 OTG Controller can be configured to support all types of USB transfers – Bulk, Interrupt and Isochronous. While operating in Device Mode it can be dynamically configured to support configurable number of endpoints, interfaces, alternate interfaces and configurations.
    • LTTS USB 2.0 OTG Controller can be configured to support any combinations of USB 2.0 interface speeds – LS(1.5 Mbps), FS (12.0 Mbps), HS (480 Mbps). Eg combinations are LS Only, FS Only, HS Only, LS and FS Only, FS and HS Only etc.
    • LTTS USB 2.0 OTG Controller has full support for all low power features of the USB Specification supporting Suspend, Remote Wakeup and Link Power Management states – L1, L2.
    • LTTS USB 2.0 OTG controller has full support for all test modes features which is required for obtaining USB-IF certification.
×
Semiconductor IP