Multimedia IP for TSMC
Welcome to the ultimate Multimedia IP for TSMC hub! Explore our vast directory of Multimedia IP for TSMC
All offers in
Multimedia IP
for TSMC
Filter
Compare
40
Multimedia IP
for TSMC
from 11 vendors
(1
-
10)
-
Camera Receiver - 10.0Gbps 8-Lane - TSMC 12FFC
- The CL12812M8RIP10000 is an ideal means to link Camera Modules or CMOS Image Sensor (CIS) to ISP (Imaging Signal Processor) and DSP.
- The CL12812M8RIP10000 is designed to support data rate in excess of maximum 10Gbps utilizing SLVS-EC ver.3.0 interface specification.
-
3D-like multicore GPU
- Programmable Shader engine with a VLIW instruction set
- Command list based DMAs to minimize CPU overhead
- Primitive Rasterizer
-
SLVS-EC TX PHY - 10GBPS 8-Lane - TSMC 12FFC
- SLVS-EC ver.3.0 compliant
- Data Rate: Up to 10Gbps / lane
- Number of data lane: 8
- Support input clock: 24MHz, 54MHz, 37.125MHz, 72MHz, 74.25MHz
-
3D OpenGL ES GPU (Graphics Processing Unit)
- Scalability throughout the entire design
- Unified Shader Architecture
- Massively parallel execution with fine grained Multithreading
- Bandwidth reduction by e.g. on the fly data compression/decompression
-
AAC-LC Audio Encoder
- MPEG2/4 AAC-LC software employed Fraunhofer IIS high quality software which supports ISO/IEC 13818-7, ISO/IEC 14496-3 and Japanese ARIB standard
-
AAC-LC Audio Decoder
- compliant with the ISO/IEC 13818-7 audio standard, using Fraunhofer IIS high quality software
- Supported channel modes: mono, dual mono, stereo (2.0), 2.1, 3.0, 3.1, 4.0, 5.0, and 5.1
-
MPEG-1/2 + AAC Audio Decoder
- MPEG-1/2 and AAC decoders are compliant with the ISO/IEC 11172-3, 13818-7, and 14496-3 audio standards, using Fraunhofer IIS high quality software
-
AAC-LC Stereo Audio Encoder
- AAC-LC encoders are compliant with the ISO/IEC 13818-7 audio standard, using Fraunhofer IIS high quality software
-
MPEG-1/2 - Layer I/II Audio Encoder
- MPEG-1/2 - Layer I/II encoders are compliant with ISO/IEC 11172-3 and 13818-3 audio standards, using Fraunhofer IIS high quality software
-
MPEG-1/2 – Layer I/II Audio Decoder
- MPEG-1/2 - Layer I/II decoders are compliant with ISO/IEC 11172-3 and 13818-3 audio standards, using Fraunhofer IIS high quality software
- Supported channel modes: mono, dual mono, stereo, and joint stereo
- Supported sampling rates: 16, 22.05, 24, 32, 44.1 and 48 kHz
- 16 to 24-bit output audio resolution