Other for SMIC
Welcome to the ultimate Other for SMIC hub! Explore our vast directory of Other for SMIC
All offers in
Other
for SMIC
Filter
Compare
12
Other
for SMIC
from 2 vendors
(1
-
10)
-
PUF
- Root of trust, unclonable, chip dependent ID with unique static and dynamic signature behavior in each chip
- Process dependent, fully invisible, root of trust
- Support 0.18um, 0.13um, 55nm, 40nm, 28nm, 14nm
- Small Area: 0.02mm2 (140um x 140um) @SMIC 55nm
-
I3C
- Supports two-wire serial interfaces: SDA/SCL
- Supports primary master/slave only or dynamic configuration
- Supports secondary master
- Compliant with JESD403-1B and MIPI_I3C_Specification_V1.0
-
eDP1.4 Transmitter PHY
- Area: 0.572mm2 (1040um x 550um) including IO and ESD
- Compliant with DP1.2 and eDP1.4 specification
- Typical 27MHz reference clock
- Support 1/2/4-lane configuration
-
DP/eDP1.4/1.2 TX PHY&controller
- Area: 0.75mm2 with pixel PLL and 0.63mm2 without pixel PLL including IO and ESD
- Compliant with DP1.4 and eDP1.4specification
- Typical 27MHz reference clock
- Supports 1/2/4-lane configuration
-
DP1.4 TX PHY
- Area: 0.75mm2 with pixel PLL and 0.63mm2 without pixel PLL including IO and ESD
- Compliant with DP1.4 and eDP1.4specification
- Typical 27MHz reference clock
- Supports 1/2/4-lane configuration
-
DP/eDP1.4/1.2 RX PHY
- Compliant with DP1.4 and eDP1.4 specifications
- Supports 1/2/4-lane configuration
- Up to 8.1Gbps per data lane
- Typical 24MHz or 27MHz reference clock
-
DP1.2 Transmitter PHY_40nm
- Area: 0.78mm2 including IO and ESD
- Note: The area parameter is for reference only. Please refer to the final LEF file for the actual values.
- Compliant with DP1.2 and eDP1.4 specifications
- Typical 27MHz reference clock
-
DP1.2 Transmitter PHY
- Area: 0.68mm2 including IO and ESD
- Note: The area parameter is for reference only. Please refer to the final LEF file for the actual values.
- Compliant with DP1.2 and eDP1.4 specifications
- Typical 27MHz reference clock
-
DP1.2 RX PHY
- Compliant with DP1.2 and eDP1.4 specifications
- Supports 1/2/4-lane configuration
- Up to 5.4Gbps per data lane
- Typical 24MHz or 27MHz reference clock
-
General comparator
- Wide range input voltage:1.50V~3.63V
- Operating current is as low as 300nA, and can be programmed to 200uA
- Ultra-low shutdown leakage current, lower than 5nA
- Supports rail-to-rail input, the common voltage range is from 0V to input power