Sensor / Monitor IP for SMIC

Compare 10 Sensor / Monitor IP for SMIC from 7 vendors (1 - 10)

PVT Sensor Subsystem
- Start-up time: Typ 20us
- Current consumption: Max 25uA
- Industry standard digital interface
- Fully integrated macro
- Standard AMBA APB interface
-40°C to +85°C Low power temperature sensor
- The 180SMIC_TS_03 is a unique stand-alone solution intended to continuously monitor IC status.
- Temperature detector consists of temperature sensor unit (the voltage at which is directly proportional to the temperature), analog core, SAR controller as calculation center for temperature measurements, as well as an internal voltage regulator, with an output level of 1.25V.
Temperature sensor
- SMIC CMOS 0.18 um
- Output voltage 1.2 V
- Temperature-compensated voltage in a wide temperature range
- Low current consumption
Temperature sensor
- SMIC CMOS 0.18 um
- Built-in 10-bit R-2R DAC
- Operating temperature range -45 …+100 º C
- Wide voltage range 2.5 … 3.6 V with own reference voltage former
Temperature Sensor with 10Bit Digital output on SMIC 40nm
- The present IP is a high accuracy and highly integrated temperature sensor
- It consists of analog front-end (TS_FE) and back-end (SDADC)
- TS_FE is to generate the temp dependence voltage (VBE or ΔVBE), and then SDADC converts the voltage to one 10bit digital code.
Temperature Sensor, +/-3C Accuracy without Trimming - SMIC 40nm
- Temperature Sensor, +/-3C Accuracy without Trimming;
Temperature Sensor, +/-3C Accuracy without Trimming - SMIC 40nm
- Temperature Sensor, +/-3C Accuracy without Trimming;
Advanced On-Die DroopTelemetry
- Programmable
- Process Portable
- Silicon Lifecycle Analytics
Temperature detector - SMIC 0.18um LL
- Area: NC
- Tlowaccu (Low temperature limit accuracy): +/- 7 °C
- Thighaccu (High temperature limit accuracy): +/- 9 °C
Sensor - SMIC 55nm Eflash
- Oscillator output basic frequency 48Mhz/50Mhz/49.5Mhz/45.12Mhz;Accuracy <1% after trimming @25°C;
- Accuracy <3.5% after trimming @-40~125°C;
- Size: 0.092mm2