IP Catalog > Foundries > SMIC > Analog IP > Clocking IP > Oscillator IP

Oscillator IP for SMIC

Welcome to the ultimate Oscillator IP for SMIC hub! Explore our vast directory of Oscillator IP for SMIC
All offers in Oscillator IP for SMIC
Filter
Filter

Login required.

Sign in

Login required.

Sign in

Search (43)
Compare 43 Oscillator IP for SMIC from 8 vendors (1 - 10)
  • Crystal Oscillators
    • The crystal oscillator macros are available in a wide range of industry-standard quartz crystals and MEMS resonators operating in the fundamental mode in the 32 kHz to 80 MHz range.
    • These oscillators, which are both power and area efficient, have a programmable transconductance to allow users to find the optimal balance between jitter and power consumption.
    Block Diagram -- Crystal Oscillators
  • Free running oscillators
    • Compact and low power
    • No external components
    • Baseline CMOS logic process masks only
    • Excellent frequency precision over PVT after trimming
    Block Diagram -- Free running oscillators
  • 7 to 150 MHz digitally controlled oscillator
    • SMIC CMOS 180 nm
    • Wide oscillation frequency adjustment range (7 MHz…150 MHz)
    • No external components required
    • Portable to other technologies (upon request)
    Block Diagram -- 7 to 150 MHz digitally controlled oscillator
  • 2.8 to 3.3 GHz Voltage controlled oscillator
    • SMIC CMOS 0.18 um
    • Wide frequency range (2.8…3.3 GHz)
    • Wide range of control voltage (300…1500 mV)
    • Built-in switched capacitor sections for VCO frequency adjustment
    Block Diagram -- 2.8 to 3.3 GHz Voltage controlled oscillator
  • High Speed 132MHz RC oscillator on SMIC 40nm
    • The present IP is a high speed Low Power RC oscillator that developed with SMIC 40nm process
    • The center frequency of the OSC is 132MHz, it contains 5-bit trim to adjust frequency range
    • This oscillator works well at the power supply range of 2.25V~3.63V
    • And it can output 132MHz clock to VCORE domain and VDD33 domain (VCORE is for the digital part)
  • 20MHz RC oscillator on SMIC 65nm
    • The present IP is a RC oscillator that developed with SMIC 65nm process
    • The center frequency of the OSC is 20MHz, it contains 5-bit trim to adjust clock period range
    • This oscillator works well at the power supply range of 1.55V~4V.
  • Low-Speed 40KHz RC oscillator on SMIC 40nm
    • The present IP is a low speed and low powerinternal RC oscillator circuit
    • The center frequency of the OSC is 40 kHz, it contains 5-bit trim to adjust frequency range
    • This oscillator works well at the power supply range of 2.25V~3.63V
    • And it can output clock to VCORE domain and VDD33 domain (VCORE is for the digital part).
  • Low power XTAL oscillator, 4M~40MHz on SMIC 40nm
    • The present IP is a crystal oscillator
    • The oscillator works series resonant mode of the crystal
    • The feedback resistor are embedded in the IP already
    • This oscillator works well at the power supply range of 2.25V~3.63V.And it can output 25MHz clock to 1.1v domain
  • 100MHz RC oscillator on SMIC 65nm
    • The present IP is developed with SMIC 65nm process
    • The center frequency of the OSC is 100MHz, it contains 5-bit trim to adjust clock period range
    • This oscillator works well at the power supply range of 1.55V~4V.
×
Semiconductor IP