Serdes IP for GLOBALFOUNDRIES

Compare 5 Serdes IP for GLOBALFOUNDRIES from 3 vendors (1 - 5)

Filter:

Ultra-short reach SerDes with 500 Gbit/s throughput
- 2x to 4x throughput at 50% or less energy consumption as compared to conventional SerDes over the same number of pins/wires
- High pin-efficiency and low power
- 208.3 Gbit/s full-duplex bandwidth per mm of die edge (500 Gbit/s for 2.4 mm of die edge)
Ethernet SerDes - 16Gbps and 10Gbps multi-protocol SerDes PHY
- Wide range of protocols that support networking, HPC, and applications
- Low-latency, long-reach, and low-power modes
- Multi-Link PHY—mix protocols within the same macro
- EyeSurf —non-destructive on-chip oscilloscope
- Extensive set of isolation, test modes, and loop-backs including APB and JTAG
- Supports 16-bit, 20-bit, and 32-bit PIPE and non-PIPE interfaces
- Selectable serial pin polarity reversal for both transmit and receive paths
28G LR Multi-Protocol SerDes (MPS) PHY - GLOBALFOUNDRIES 12nm
- Optimized for low-power operation and north/south die-edge placement
- Duplex Lane configurations of x4 and x1
32G Multi Rate Very Short Reach SerDes PHY - GlobalFoundries 12LP and 12LPP
- Line rates from 1.25 up to 32Gbps
- PCIe up to Gen5.0
- Ethernet 10G, 25G, 50G, 100G
32G Multi Rate Long Reach SerDes PHY - GlobalFoundries 12LP and 12LPP
- Line rates from 1.25 up to 32Gbps
- PCIe up to Gen5.0
- PIPE interface