USB On-The-Go Controller IP
Welcome to the ultimate USB On-The-Go Controller IP hub! Explore our vast directory of USB On-The-Go Controller IP
All offers in
USB On-The-Go Controller IP
Filter
Compare
24
USB On-The-Go Controller IP
from 12 vendors
(1
-
10)
-
USB 2.0 On-The-Go IP Core, Compliance Certified
- A ‘Dual-Role’ USB 2.0 On-The-Go IP Core that operates as both an USB 2.0 peripheral or as an USB 2.0 OTG host in a point-to-point communications with another USB device.
- The USB OTG IP Core is fully USB 2.0 and USB 2.0 On-The-Go Supplement compliant.
-
USB 3.0 OTG High / Full / Low- Speed Dual Role IP Core
- Support SW controlled host/device role switching.
- Support Superspeed, Highspeed and Fullspeed
- Support Control, Bulk, Interrupt and Isochronous Transfer Types
- Support U1/U2/U3 power saving modes for USB 3.x port
-
USB 3.1 SuperSpeed Dual-Role Device Controller (USB-IF Certified)
- USB-IF Certified full-feature Dual Role Device Controller solution
- Next generation USB controller architecture producing the smallest size, lowest power, and maximum configurability
- Compliant with USB 3.1 specification revision 1.0 with latest ECNs
- Compliant with xHCI specification revision 1.1
-
USB 3.1 SuperSpeed Device Controller (USB-IF Certified)
- USB-IF Certified full-feature Device Controller solution
- Next generation USB controller architecture producing the smallest size, lowest power, and maximum configurability
- Compliant with USB 3.1 specification revision 1.0 with latest ECNs
- Compliant with xHCI specification revision 1.1
-
USB 2.0 PHY For On-The-Go Controller
- Complies with USB specifications, rev. 2.0 and 1.1
- Complies with UTMI+ specification, level 3, rev. 1.0
- Supports OTG USB 2.0
- Supports 480Mb/s (HS), 12Mb/s (FS) and 1.5MB/s (LS) serial data transmission rates
-
USB 2.0 On-The-Go Controller
- High speed support: 480 Mbit/s
- Full speed support: 12 Mbit/s
- USB 2.0 Compliant
- High/Full speed support using 8/16 bit UTMI/ULPI interface
-
Multi-Point Hi-Speed OTG Controller
- Applicable to either point-to-point or multi-point USB OTG
- Complies with the USB 2.0 standard for Hi-Speed (480 Mbps) and Full-Speed (12Mbps) functions and with the OTG supplement to the USB 2.0 specification
- May be used with High-, Full-, or LowSpeed USB devices
- Can be used as either host or peripheral in point-to-point OTG
-
USB 2.0 High Speed Dual-Role Device Controller (USB-IF Certified)
- USB-IF Certified full-feature PC Host solution
- Next generation USB controller architecture producing the smallest size, lowest power, and maximum configurability
- Compliant with USB 2.0 specification revision 1.0 with latest ECNs
- Compliant with xHCI specification revision 1.1
-
USB 2.0 High Speed Device Controller (USB-IF Certified)
- USB-IF Certified full-feature PC Host solution
- Next generation USB controller architecture producing the smallest size, lowest power, and maximum configurability
- Compliant with USB 2.0 specification revision 1.0 with latest ECNs
- Compliant with xHCI specification revision 1.1
-
USB 3.0 SuperSpeed Dual Role Device Controller (USB-IF Certified)
- USB-IF Certified full-feature PC Host solution
- Next generation USB controller architecture producing the smallest size, lowest power, and maximum configurability
- Compliant with USB 3.0 specification revision 1.0 with latest ECNs
- Compliant with xHCI specification revision 1.1