Voltage Reference IP for TSMC

Compare 29 Voltage Reference IP for TSMC from 9 vendors (1 - 10)

Linear Low-Dropout Regulator (Output Voltage 0.9V)
- Output Voltage 0.9V
- TSMC 12/16nm CMOS FinFET
Bandgap Voltage Reference (0.6V and 0.8V References)
- 0.6V and 0.8V References
- Eight 50uA reference output currents implemented
- TSMC12/16nm CMOS FinFET
Ultra-Low-Power Bandgap Voltage Reference in 40nm CMOS
- 140nA supply current
- Less than 40ppm/C temperature coefficient
- - 40C to 125C operation
- Supply voltage down to 1.62V
IR DROP TSMC
- • Active current current: 120uA
- • Powered-down current: <1uA
- • Detection time: 25nS typ.
- • Hysteresis: 20mV typ.
Bandgap Voltage / Current Reference TSMC
- Input Voltage Range: PDK VddIO
- Programmable Output Voltage Range
- Untrimmed Accuracy: 5%
- Trimmed Accuracy (single point trim): 0.5%
Power-On-Reset TSMC
- Start-up Time: max 10us
- Configurable Threshold
- Programmable Delay
- Uses Hysteresis to avoid false resets in noisy environments
180nm 5V Bandgap
- 2.5V-5.5V operation.
- 3? 4% untrimmed voltage reference accuracy.
- 2% variation over -40ºC to 125ºC after trimming.
- 70dB low frequency PSRR.
Micro Power Bandgap for TSMC 180nm
- Less than 1µW power dissipation.
- Bandgap untrimmed precision of ±10% over process, temperature, and voltage.
- 100nA PTAT bias current output.
- 1.6V-2V operation
Bandgap Reference 1.22V bandgap, 1V & 0.5V Output
- Bandgap Voltage Reference
- Constant-Gm current generator with multiple outputs
- Multiple reference voltage outputs
- Deep N-Well isolated design for increased noise isolation
Ultra-Low-Power Bandgap Voltage Reference in 6nm CMOS
- Precision band-gap reference
- 40dB AC PSRR, 50dB DC PSRR
- ±12mV voltage accuracy
- 30ppm/C temperature drift