10-Bit ADC IP
10-Bit ADC IP cores come in various speeds, use different interfaces, and provide differing degrees of accuracy. The most common types of ADCs are flash, successive approximation, and sigma-delta.
The vendors support all the major foundries including TSMC, GlobalFoundries, Intel Foundry, Samsung Foundry and UMC.
All offers in
10-Bit ADC IP
Filter
Compare
118
10-Bit ADC IP
from
32
vendors
(1
-
10)
-
10-bit 2.5GSPS ADC
- The ODT-ADS-10B2P5G-T16 is an ultra lowpower, high-performance time-interleaved ADC designed in a 16nm CMOS process.
- This 10-bit, 2.5GSPS ADC supports input signals up to 1.0 GHz and features a differential full-scale range of 1.0Vpp with excellent static and dynamic performance.
-
10-bit, 5 MSPS ADC in 12nm CMOS on GF 12nm LP+
- The ADC is an ultra-low-power ADC designed in a GF 12nm LP+ process.
- This 10-bit, 5MSPS ADC supports input signals up to 1 MHz and features 2V differential full-scale input range with excellent static and dynamic performance. The input front-end includes a 4:1 mux.
-
10 Bit 40 MS/s Pipeline ADC on AMS C18
- The IP consists of a 10 bit 40 MS/s pipeline ADC. A time-interleaved architecture with 1.5 bit per stage is used.
- The operational amplifiers are shared between the interleaved stages for reduced power consumption.
- The interleaving is transparent for the application.
-
10/12-bit SAR ADC
- The SAR ADC IP is a small-size, low power analog to digital converter which leverages charge-redistribution successive approximation technology
- It offers a reliable solution of analog-to-digital signal conversion for general application
- Innosilicon SAR ADC IP consists of input MUX, ADC core, and digital logic
-
ADC SAR 10 Bit
- SAR logic ADC 10 bit converter, 12 cycles
- Supply Voltage: 1.5 V
- Resolution: 10 bits
- Conversion rate: 70 MHz
-
10-bit 4-channel 5 to 100 MSPS pipeline ADC
- TSMC CMOS 65 nm
- Resolution 10-bit
- 4-channel
- Different power supplies for digital (1.2 V) and analog parts (1.2 V)
-
10-bit 50kSPS SAR ADC - 10 bits, 50kSPS, 4 multiplexed inputs - XFAB 0.35 um
- This macro-cell is a low power, general purpose, 10-bit, 50kSPS, Successive Approximation Register (SAR) Analog-to-Digital Converter (ADC) core designed for X-FAB 0.35μm XH035 CMOS technology.
- The circuit uses one 3.3V analog supply and one 3.3V digital supply and is targeted for microcontroller applications.
-
Li-Ion Battery Charger - ±1% Accuracy (4.2V) / Up to 1500mA Fast Charge - Silterra 0.18 um
- This macro-cell is a precision linear Li-Ion battery charger core (4.2V, +/-1%) designed for SilTerra CL180GH5 0.18μm CMOS technology (5V).
- The circuit has internal under/over-voltage, current/temperature protections. It includes a built-in NTC circuit with internal bias resistor for the battery thermistor.
-
8/10-bit Analog-to-Digital Converter
- Resolution: 8b, 10b
- Sampling Rate (Fs): 1 Msps to 20Msps
- Input Signal Bandwidth: Fs/2
- SINAD1: Typ 54dB
-
10bit SAR ADC for general voltage measurements
- Analog Supply Voltage: 3.0...3.6V
- Digital Supply Voltage: 3.0...3.6V
- DC current consumption: 500uA
- Operating Temperature: -40°C to +125°C.
- TSMC, 180nm BCD (GEN-3).