The Embedded SoC
by Jan Rabaey
Attendees at this year's DAC should pay particular attention to the changing nature of embedded systems as they become more interchangeable, and more closely identified, with multifunction SoCs.
Embedded system SoCs raise the level of complexity in high-density ICs with their programmable and mixed-signal natures. Like their board-based cousins, they also have to interact with the "real world" and are extremely cost sensitive.
When embedded systems were board based, it was fairly straightforward to select the proper components, integrate them with software, and ship the product. Creating such an amalgam on chip is quite a different matter, and even the smallest mistakes can quickly turn into multimillion-dollar headaches given the complexity and cost associated with repairing or respinning silicon.
In broad terms, these "costs" can be defined as 1) Manufacturing, meaning the production cost based on complexity; 2) NREs, or the necessary retooling for a new methodology or production model; and 3) Design Costs, the price of talent and what it takes to manage the physical effects associated with ultra-DSM IC creation.
Attendees at this year's DAC should pay particular attention to the changing nature of embedded systems as they become more interchangeable, and more closely identified, with multifunction SoCs.
Embedded system SoCs raise the level of complexity in high-density ICs with their programmable and mixed-signal natures. Like their board-based cousins, they also have to interact with the "real world" and are extremely cost sensitive.
When embedded systems were board based, it was fairly straightforward to select the proper components, integrate them with software, and ship the product. Creating such an amalgam on chip is quite a different matter, and even the smallest mistakes can quickly turn into multimillion-dollar headaches given the complexity and cost associated with repairing or respinning silicon.
In broad terms, these "costs" can be defined as 1) Manufacturing, meaning the production cost based on complexity; 2) NREs, or the necessary retooling for a new methodology or production model; and 3) Design Costs, the price of talent and what it takes to manage the physical effects associated with ultra-DSM IC creation.
Related Semiconductor IP
- HBM4 PHY IP
- Ultra-Low-Power LPDDR3/LPDDR2/DDR3L Combo Subsystem
- MIPI D-PHY and FPD-Link (LVDS) Combinational Transmitter for TSMC 22nm ULP
- HBM4 Controller IP
- IPSEC AES-256-GCM (Standalone IPsec)
Related Articles
- An Efficient Device for Forward Collision Warning Using Low Cost Stereo Camera & Embedded SoC
- Testing Of Repairable Embedded Memories in SoC: Approach and Challenges
- Internal JTAG - A cutting-edge solution for embedded instrument testing in SoC: Part 1
- Internal JTAG - A cutting-edge solution for embedded instrument testing in SoC: Part 2
Latest Articles
- ElfCore: A 28nm Neural Processor Enabling Dynamic Structured Sparse Training and Online Self-Supervised Learning with Activity-Dependent Weight Update
- A 14ns-Latency 9Gb/s 0.44mm² 62pJ/b Short-Blocklength LDPC Decoder ASIC in 22FDX
- Pipeline Stage Resolved Timing Characterization of FPGA and ASIC Implementations of a RISC V Processor
- Lyra: A Hardware-Accelerated RISC-V Verification Framework with Generative Model-Based Processor Fuzzing
- Leveraging FPGAs for Homomorphic Matrix-Vector Multiplication in Oblivious Message Retrieval