How to reduce power consumption in CPLD designs with power supply cycling
By Gordon Hands, Lattice Semiconductor
pldesignline.com (March 11, 2009)
It is increasingly common for Complex Programmable Logic Devices (CPLDs) to be used in systems with stringent power budgets. Examples include smart phones, handheld instrumentation, video recording equipment, and navigation devices. Although a number of "zero power" CPLDs exist with standby power measured in microamps, these devices often don't have the features required for a particular design. In these cases, power supply cycling offers designers a viable means to achieve the desired features as well as low power consumption.
The duty cycle approach to power consumption reduction relies on the fact that for much of the time equipment is operational there is often little processing required by the CPLD. For example, the CPLD may be scanning a key pad to see if a key press has occurred, or is waiting for some communication on a serial interface.
CPLDs, like all integrated circuits, consume some power associated with device bias and leakage, regardless of activity. This power is often referred to as static current. CPLDs also consume power as a result of signals switching inside the device. This power is often referred to as dynamic power.
The amount of energy consumed as dynamic power is proportional to the amount of processing undertaken. Thus, achieving an operation in 0.1 seconds at 100 MHz consumes approximately the same amount of energy (in terms of dynamic power) as achieving the same operation in ten seconds at 1 MHz.
These characteristics of dynamic and static power can be used to minimize the overall power consumption of a design by compressing required activity into a small time period and turning off the CPLD during periods of inactivity.
To read the full article, click here
Related Semiconductor IP
- Process/Voltage/Temperature Sensor with Self-calibration (Supply voltage 1.2V) - TSMC 3nm N3P
- USB 20Gbps Device Controller
- SM4 Cipher Engine
- Ultra-High-Speed Time-Interleaved 7-bit 64GSPS ADC on 3nm
- Fault Tolerant DDR2/DDR3/DDR4 Memory controller
Related White Papers
- How Sun reduced cost /supply risk by moving to COT
- On-chip di/dt Detector IP for Power Supply
- Reverse Disaggregation - How Silicon IP Will Change the Semiconductor Supply Chain
- 6 steps for optimizing the IC supply chain
Latest White Papers
- Fault Injection in On-Chip Interconnects: A Comparative Study of Wishbone, AXI-Lite, and AXI
- eFPGA – Hidden Engine of Tomorrow’s High-Frequency Trading Systems
- aTENNuate: Optimized Real-time Speech Enhancement with Deep SSMs on RawAudio
- Combating the Memory Walls: Optimization Pathways for Long-Context Agentic LLM Inference
- Hardware Acceleration of Kolmogorov-Arnold Network (KAN) in Large-Scale Systems