FPGA design from scratch

I have been designing ASICs for more than 15 years. A few years ago I started to realize that there is another player in town and that is the FPGA circuit. With increasing NRE costs and with the long turn-around times, ASIC designs have become high-risk projects. At the same time FPGAs are getting bigger and faster and many companies have therefore decided to only use FPGAs. I also realized that I have to learn how to design using FPGAs, if I were to get any consulting jobs, especially here in Sweden. This is my story of how I hopefully will learn to use FPGAs in my future designs.

Part 1

• Introduction
• Ordering the MicroBlaze development kit
• Installing the Integrated Software Environment (ISE)
• Running a board demo test

Part 2

• Design object description

Part 3

• Setting up the Integrated Software Environment (ISE) design software
• Running the Integrated Software Environment (ISE) design software

Part 4

• Adding Verilog source code
• Generating memories using Coregen
• Synthesizing the design
• Simulating the design (Introduction)

Part 5

• Setting up the simulation environment using Mongoose

Part 6

• The simulation process
• Compiling macro libraries
• Compiling the design
• Compiling the testbench
• Elaborating everything

Part 7

• Testbench description

Part 8

• Using HAL the HDL analysis and linting tool from Cadence

Part 9

• Regression testing using Mongoose

Part 10

• Synthesis using timing constraints (Introduction)

Part 11

• The Field Programmable Gate Array (FPGA) description

Part 12

• Adding synthesis constraints

Part 13

• The MicroBlaze soft processor core
• Compiling simulation libraries using compedklib

Part 14

• Putting everything together
• Installing ISE WebPack 9.1i
• Installing EDK 9.1i

Part 15

• Xilinx Platform Studio XPS
• Software Development Kit SDK
• Create a new project in XPS
• Generate a design report file

Part 16

• Create or import an user peripheral
• The MHS file
• XPS project files
• Xilinx IP center

Part 17

• Adding the ETC IP
• Generate the system netlist using platgen
• What happend during the netlist generation
• Generate simulation HDL files

Part 18

• Putting together a system simulation environment
• The simulation database
• The cds.lib file
• Compiling the ETC IP
• Compiling the block RAM
• Compiling Verilog wrappers
• Compiling VHDL wrappers
• Elaborating the design
• Warning messages

Part 19

• Generating a Verilog testbench

Part 20

• Running our first simulation
• Adding the DDR SDRAM
• Suppressing assert messages in IEEE packages

Part 21

• Debugging the simulation testbench
• The reset logic

Part 22

• Using the XPS software development kit (SDK)
• Software development flow
• GNU compiler collection (gcc)
• Running SDK
• Creating a new C appilcation project

Part 23

• Simulating program execution in the MicroBlaze processor
• Verification strategy
• Verification flow
• Writing a simple c program
• Loading the program
• Running an NCSIM simulation
• Simulation result
• Compile and build the program inside SDK
• Generate assembly code and hex code
• Make a NCSIM memory load file
• Running a simulation

Part 24

• System simulations
• DDR SDRAM controller
• LED displays and push buttons
• OPB GPIO registers
• Embedded test controller
• Debugging the On-Chip Peripheral bus

Part 25

• Implementing the hardware platform
• User constraints file
• Setting up our constraints file
• Specify pin constraints
• Specify timing constraints
• The implementation directory
• Start bitstrem generation
• Bitstream generation flow
• Scriptfile to run XFlow
• Bitstream generation result
• Configuration of the FPGA
• Using the platform cable USB
• ML403 evaluation board
• ML403 block diagram
• Installing cable drivers
• Xilinx JTAG tools on Linux without proprietary kernel modules
• Setting up the USB cable
• iMPACT FPGA configuration tool
• Starting iMPACT

Part 26

• Using the iMPACT configuration tool
• Boundary Scan and JTAG configuration
• IEE standard 1149.1 (JTAG)
• The identification register
• Read IDCODE
• Read the FPGA status register
• Device configuration
• Using Xilinx Platform Studio

Part 27

• Pin assignment closure process
• PACE Pin and Area Constraint Editor
• Running PACE
• Topi the Top Code Generator
• Topi setup
• Using Topi to modify the Xilinx user constraints file
• Xilinx Floorplanner
• Viewing pin placement
• Xilinx PlanAhead

Part 28

• Power calculations
• XPower
• Low power consumption

Part 29

• Hardware setup
• Software setup
• Download and execute a simple program
• Download the bitstream
• Get program size
• Running the program

Part 30

• Running demonstration software applications
• ML403 Reference Systemson the CD

Part 31

• Adding a 16x2 character LCD display
• Set address range
• Connecting ports
• The easy way to add a new block
• Configure the IP block
• The LCD driver
• LCD display timing
• 8-bit write operation
• Programming sequence
• Display setup
• More reading
• Signal wiring on the ML403 board
• Adding constraints
• Generate netlist
• Generate bitstream

Part 32

• Writing the "Hello World" program
• SDK platform settings
• C program build
• C header files
• The GPIO API definitions
• C program examples
• Device configuartion in SDK

Part 33

• Simulating the LCD driver
• C program
• Program execution (Waveform plot)
• Generating the software libraries and BSPs
• GNU compiler tools
• Input files
• Output files
• Output from SDK build process
• Display program size

Part 34

• Program disassembly
• MicroBlaze software reference guide
• System memory layout
• Reset sequence
• ELF file content
• Startup files
• First stage initialization files
• Second stage initialization files

Part 35

• Generate simualtion HDL files
• Simgen
• Data2MEM memory tool
• ETC_system_sim.bmm
• ETC_system_init.vhd
• ETC_system_tb.vhd
• Modifying the testbench file
• Compiling the BRAM initialization file
• Compiling the testbench
• Simulating program execution

Part 36

• The LCD driver (once more)
• Editing the user constraints file
• Generate new bitstream
• Device configuration
• Application program
• Displaying "Hello World"

Part 37

• Debugging our design
• Xilinx microprocessor debugger and GNU software debugging tools
• Xilinx microprocessor debugger (XMD)
• MicroBlaze processor target
• MicroBlaze MDM hardware setup
• Debug session
• Reading registers in MicroBlaze
• Load program
• Set breakpoint
• Remove breakpoint
• Display breakpoints
• Start program execution
• Single step
• Stop program execution
• Display program code
• Getting help
• Using XMD in Xilinx Platform Studio

Part 38

• Writing software for our embedded system
• Writing a software device driver
• Software development overview
• Device driver programmer guide
• Platform specification format reference manual
• Microprocessor Driver Definition (MDD)
• Libraries and driver generation
• Device driver architecture
• xparameters.h
• Software driver source code
• Source code repository
• Software device drivers used
• SDK project directory
• Header source files

Part 39

• Fixing our software driver
• etc_v2_1_0.tcl
• etc_v2_1_0.mdd
• Makefile
• xetc_g.c
• xetc.h
• xetc_l.h
• Writing an application program
• Print statements
• Printout from program
• Generate HDL simulation files
• Generating the BRAM initialization file
• Running a simulation