eUSB2 PHY IP
Filter
Compare
22
IP
from
7
vendors
(1
-
10)
-
eUSB2 v1.1 Dual-Role, repeater/native mode PHY, SamSung 28FDSOI, 1.8V, N/S orientation
- Fully compliant with Embedded Universal Serial Bus 2.0 (eUSB) electrical specification
- Compliant with UTMI+ specifications (High-speed, Full-speed, and Low-speed functions)
- Support clock inputs from 10/12/25/30/19.2/24/32/38.4MHz clock source
- Support repeater and native modes
-
eUSB2 v1.1 Dual-Role, repeater/native mode PHY, SamSung 3LPE, 1.2V, N/S orientation
- Fully compliant with Embedded Universal Serial Bus 2.0 (eUSB) electrical specification
- Compliant with UTMI+ specifications (High-speed, Full-speed, and Low-speed functions)
- Support clock inputs from 10/12/25/30/19.2/24/32/38.4MHz clock source
- Support repeater and native modes
-
eUSB2 v1.2 Dual-Role, repeater/native mode PHY, SamSung SF3P, 1.0V, N/S orientation
- Fully compliant with Embedded Universal Serial Bus 2.0 (eUSB) electrical specification
- Compliant with UTMI+ specifications (High-speed, Full-speed, and Low-speed functions)
- Support clock inputs from 10/12/25/30/19.2/24/32/38.4MHz clock source
- Support repeater and native modes
-
eUSB2 v1.1 Dual-Role, repeater/native mode PHY, TSMC N7, 1.8V or 1.2V, N/S orientation
- Fully compliant with Embedded Universal Serial Bus 2.0 (eUSB) electrical specification
- Compliant with UTMI+ specifications (High-speed, Full-speed, and Low-speed functions)
- Support clock inputs from 10/12/25/30/19.2/24/32/38.4MHz clock source
- Support repeater and native modes
-
eUSB2 v1.1 Dual-Role, repeater/native mode PHY, TSMC N5, 1.2V, N/S orientation
- Fully compliant with Embedded Universal Serial Bus 2.0 (eUSB) electrical specification
- Compliant with UTMI+ specifications (High-speed, Full-speed, and Low-speed functions)
- Support clock inputs from 10/12/25/30/19.2/24/32/38.4MHz clock source
- Support repeater and native modes
-
eUSB2 v1.1 Dual-Role, repeater/native mode PHY, TSMC N5A, 1.2V, N/S orientation (ASIL-B)
- Fully compliant with Embedded Universal Serial Bus 2.0 (eUSB) electrical specification
- Compliant with UTMI+ specifications (High-speed, Full-speed, and Low-speed functions)
- Support clock inputs from 10/12/25/30/19.2/24/32/38.4MHz clock source
- Support repeater and native modes
-
eUSB2 v1.1 Dual-Role, repeater/native mode PHY, TSMC N3E, 1.2V, N/S orientation
- Fully compliant with Embedded Universal Serial Bus 2.0 (eUSB) electrical specification
- Compliant with UTMI+ specifications (High-speed, Full-speed, and Low-speed functions)
- Support clock inputs from 10/12/25/30/19.2/24/32/38.4MHz clock source
- Support repeater and native modes
-
eUSB2 v1.2 Dual-Role, repeater/native mode PHY, TSMC N3P, 1.2V, N/S orientation
- Fully compliant with Embedded Universal Serial Bus 2.0 (eUSB) electrical specification
- Compliant with UTMI+ specifications (High-speed, Full-speed, and Low-speed functions)
- Support clock inputs from 10/12/25/30/19.2/24/32/38.4MHz clock source
- Support repeater and native modes
-
eUSB2V1.2 Controller + PHY IP
- eUSB2 can support USB high-speed, full-speed, and low-speed operation, as well as the USB 2.0 L1/L2 link power management requirements. In addition, eUSB2 requires no change to the existing USB 2.0 software programming model.
- eUSB2 also uses the same two data line configurations, eD+ and eD- as USB2 D+ and D-. Vbus and power delivery are not impacted by eUSB2.
-
eUSB2V2.0 Controller + PHY IP
- While traditional eUSB2 meets basic connectivity needs at 480 Mbps, modern SoCs and peripherals demand significantly higher throughput.
- eUSB2-V2.0 bridges this gap by delivering up to 10× performance improvement, along with better power efficiency and EMI control — without changing the fundamental USB 2.0 software ecosystem.
