IP Catalog > USB3.0 HUB

USB3.0 HUB IP

Filter
Filter

Login required.

Sign in

Search (8)
Compare 8 IP from 6 vendors (1 - 8)
  • USB3.x HUB IIP
    • USB 3.0/3.1/3.2 Common support
    • Compliant with USB 3.0/3.1/3.2 specification
    • Supports Superspeed USB 3.0, SuperSpeedPlus 3.1, 3.2
    • Configurable number of Configurations, Interfaces, Alternative Interfaces and Endpoints
    Block Diagram -- USB3.x HUB IIP
  • USB 3.0 Hub
    • Complies with USB 3.0 standard for Super-Speed (5.0 Gbps), Hi-Speed (480 Mbps), Full-Speed (12Mbps) and Low-Speed (1.5 Mbps).
    • Backward compatible with USB2.0 devicesand hubs and the type A connectors.
    • Technology and P rocessindependent.
    • Data Interface is Dual-simplex, 4-wire differential signaling, separate from USB2.0 signaling with downstream connect / disconnect detection.
  • Super Speed USB 3.0 Extensible Host Controller xHCI
    • Complies with USB 3.0 Standard for Super Speed (5 Gbps), High Speed (480 Mbps), Full-Speed (12 Mbps) and Low-Speed (1.5 Mbps).
  • USB 3.2 Verification IP
    • Fully compliant with USB 3.2 specification version 1.1, xHCI Specification Revision 1.2, and Pipe Interface 6.1.1 with Message Bus Interface for USB3.2 Architecture with backward compatibility to USB3.1, USB3.0 and USB2.0 (including USB2.0, USB 3.0. OTG)
    • Supports USB Type-C.
    • Supports up to 128 devices including hub and device on any tier level.
    • Supports 15 IN and 15 OUT and 1 control endpoint for each device.
    Block Diagram -- USB 3.2 Verification IP
  • Simulation VIP for USB
    • Configurations
    • Gen2x2, Gen1x2, Gen2x1, and Gen1x1
    • Supported DUT Models
    • Host, Device and PHY Model for USB2 or USB3
  • USB3.x OTG IIP
    • USB 3.0/3.1/3.2 Common support
    • Compliant with USB 3.0/3.1/3.2 specification
    • Supports Superspeed USB 3.0, SuperSpeedPlus 3.1, 3.2
    • Configurable number of Configurations, Interfaces, Alternative Interfaces and Endpoints
    Block Diagram -- USB3.x OTG IIP
  • USB 3.0 SSIC Controller
    • Compliant with SSIC v1.01
    • Compliant with M-PHY Specification v2.0
    • Compliant with USB3.0 Pipe Specification
    Block Diagram -- USB 3.0 SSIC Controller
  • USB 3.0 Gen1 / Gen2 Device Controller IP
    • USB 3.0 Device controller can be configured to support all types of USB transfers – bulk, interrupt and isochronous.
    • Allows dynamic configuration to support configurable number of endpoints, interfaces, alternate interfaces and configurations.
    • USB 3.0 Device controller can be configured to support any combinations of USB 3.0 interface speeds – SSP (10 Gbps), SS (5 Gbps), HS (480 Mbps), FS (12 Mbps) and LS (1.5 Mbps). Sample combinations are SSP & SS only, SSP & SS & HS only, SSP & SS & HS & FS only, SS only, SS & HS only, SS & HS or FS only.
    • USB 3.0 Device controller has full support for all low power features of the USB specification supporting suspend and remote wakeup, USB 3.0 low power states – U1/U2/U3 and USB 2.0 Link Power Management states – L1, L2.
    Block Diagram -- USB 3.0 Gen1 / Gen2 Device Controller IP
×
Semiconductor IP