IP Catalog > Interface IP > Interconnect IP > USB IP > USB IP > USB Controller IP > Simulation VIP for USB

Simulation VIP for USB

Overview

The Cadence® Verification IP (VIP) for USB is a complete VIP solution for the Universal Serial Bus Revision 3.2 Specification and errata. It provides a mature and comprehensive verification IP (VIP) for the USB protocol, which is part of the USB family. Incorporating the latest protocol updates, the USB VIP is not only a complete bus functional model (BFM) for the DUT but it also provides integrated automatic protocol checks and coverage model. USB VIP is designed to make it easy for you to integrate in testbenches for IP, system-on-chip (SOC), and system level. The USB VIP helps you to reduce time to test by accelerating verification closure and ensuring end product quality.

The VIP for USB runs on all major simulators and supports all main verification languages, such as Verilog, System Verilog, and e, alongside industry-standard methodologies for testbench writing, such as Universal Verification Methodology (UVM) and Open Verification Methodology (OVM).

Supported Specifications: USB3.2, USB 3.1, USB3.0, USB2, USB1.1 and xHCI.

Key Features

  • Configurations
    • Gen2x2, Gen1x2, Gen2x1, and Gen1x1
  • Supported DUT Models
    • Host, Device and PHY Model for USB2 or USB3
    • Hub Model (3.2/3.1/3.0/2.0)
    • xHCI Model (Extensible Host Controller Interface)
    • Re-timer Model
    • Re-driver Model
  • Supported Interfaces
    • Serial (TX/TX_, RX/RX_)
    • DPDM (Dp/Dm)
    • HSIC
    • UTMI/UTMI+ (MAC or MACRO (include-PHY) with 8 or 16-bit data width)
    • ULPI (MAC or MACRO)
    • PIPE (MAC, PHY, or MACRO (include-PHY) with 8, 16, or 32-bit PIPE width)
  • OTG Support
    • OTG 1.3, 2.0, and 3.0 revisions with both A-device and B-device configurations
  • OTG Protocol
    • SRP, ADP, HNP and RSP
  • Framework and Protocol Layer
    • Control, Bulk, Isochronous, Interrupt Transfers
    • SSI (Smart Isochronous)
    • Bulk Streaming
    • Data Bursting
    • Updates value of Endpoint Companion and Isochronous Endpoint Companion descriptor type
  • Physical Layer
    • 8b/10b (Gen1x2) and 128b/132b (Gen2x2) encoding/decoding per lane
    • Separate clock source per lane
    • Spread Spectrum Clocking (SSC)
    • Control for SKP and SYNC insertion
    • Clock Recovery
    • Lane-Lane De-skew on Rx
    • LFSR per lane and enable/disable scrambling
    • PHY loop-back state with bit error rate test
    • Re-timer presence announcement based on LBPM signaling 
    • Fe-timer SKP number calculation in Host and Device VIP
  • Link Layer
    • Link Power Management U0, U1, U2, and U3
    • RTSSM and LTSSM with user control to direct into any state
    • Nullified and partially nullified DP
    • Loopback and Compliance
    • Ux Exit on configuration lane
    • Speed negotiation and fallback for host, device, hub
    • ByPass Link training
    • Holding VIP LTSSM until DUT is ready
  • Extensible Host Controller Interface
    • Support for user control to initialize MMIO and host memory space
    • Additional hooks in the TB to connect xHCI driver with PCIE interface
    • TRBs (Multi/Single), Command TRB, Event TRB, Transfer TRB, other TRB
    • Scatter-Gather Transfers
    • Scratchpad buffer
    • Command Interface/Ring (Command Ring, Event Ring, Transfer Rung)/Input Context and Device Context
    • Supports all types of transactions
  • Protocol Traffic
    • Supports all types of transfers: bulk, control, interrupt, and isochronous and split transactions
    • Full control on the device VIP to do flow control, such as sending NRDY or ERDY
  • Loopback and BERT
    • PHY loop-back state with bit error rate test
  • Hub
    • Hub training, basic topology enumeration, packet routing, and forwarding
    • USB3.1/3.2 Hub with manual enumeration, basic topologies, training, packet forwarding
  • Enumeration
    • Bypass the enumeration process and do backdoor register writing for set_address and set_config
    • Manual enumeration
    • Enable auto enumeration process from the host VIP
  • Register Interface
    • Change the severity (Error, Warning, Info) of protocol assertions
    • Initiate low-power enter/exit sequences from the VIP
    • Control functionality such as end-point buffers, to exercise device flow control, streaming
    • Collect VIP model information, such as device states, device address, end-point information, LTSSM states, and more. The information can easily accessed in the testbench
  • Error Injection
    • Predefined error injections such as Crc5, Crc16, and Crc32 for header packets, link commands, data packets, discarding a packet
    • Additional Error Injection scenarios can be generated using VIP callbacks
  • Tunneling with USB4
    • Support for USB4 Interface (USB3 Tunneling)

Technical Specifications

Request Info

Related IPs

×
Semiconductor IP