USB OTG IP
Filter
Compare
119
IP
from 25 vendors
(1
-
10)
-
3V-5V Charge Pump for USB OTG
- Process: SMIC0.18 Logic M4/5/6
- Operating temperature range: -40~125c
- Input voltage range: 2.7~3.7V
- Output voltage: 5+/-0.25V (within all the output current range)
-
USB OTG Function Controller
- Dual Role Device: Operates either as a Function Controller for a USB peripheral or as the Host / Peripheral in point-to-point communication with another USB Function.
- Complies with the USB standard for Full-Speed (12 Mbps), High-Speed (480 Mbps) Functions and with the On-The-Go supplement to the USB 2.0 specification.
- Supports point-to-point communication with a Full-Speed or High-Speed device.
- Supports both Session Request Protocol (SRP) and Host Negotiation Protocol (HNP).
-
USB 2.0 OTG High / Full / Low- Speed Dual Role IP Core
- Support SW controlled host/device role switching.
- Support Fullspeed and Lowspeed
- Support Control, Bulk, Interrupt and Isochronous Transfer Types
- Support L1/L2 power saving modes for USB 2.0 port
-
USB 3.0 OTG High / Full / Low- Speed Dual Role IP Core
- Support SW controlled host/device role switching.
- Support Superspeed, Highspeed and Fullspeed
- Support Control, Bulk, Interrupt and Isochronous Transfer Types
- Support U1/U2/U3 power saving modes for USB 3.x port
-
USB 2.0 OTG On-The-Go Transceiver PHY
- Fully compliant with latest USB 2.0
- Innovative technique to recover clock from 480 Mbps data.
- High frequency PLL.
- Advanced High-Speed Transmitter and Receiver.
-
USB 2.0 OTG Full/Low-Speed Dual Role Core
- Fully compliant to USB Specification 2.0 and the On-The-Go Supplement, Revision 1.0
- Full-/Low-Speed Device and Host capability (12Mbps/1.5Mbps)
- Supports Host Negotiation Protocol (HNP)
- Supports Session Request Protocol (SRP)
-
USB 2.0 OTG High/Full/Low-Speed Dual Role Core
- Fully compliant to USB Specification 2.0 and the On-The-Go Supplement, Revision 1.0
- Fully compliant to UTMI Specification 1.05 and UTMI+ Specification 1.0 up to UTMI+ level 3
- Fully compliant to UTMI+ Low Pin Interface Specification 1.0
- High-/Full-/Low-Speed device and host capability (480Mbps/12Mbps/1.5Mbps)