NAND flash memory IP
Filter
Compare
62
IP
from
22
vendors
(1
-
10)
-
SPI NAND Flash Memory Model
- Fully compatible with SPI Nand Flash standards.
- Follows Nand Flash specification as defined in Micron specifications.
- Supports all commands as per specifications.
- Supports Master and Slave Mode
-
NAND Flash Memory Model
- Supports NAND Flash memory devices from all leading vendors.
- Supports 100% of NAND FLASH protocol standard of HY27UH08AG(5/D)M.
- Supports all the NAND FLASH commands as per the specs.
- Provides cost effective solutions for mass storage applications.
-
Flash Memory Controller IP, Support NAND type Flash memory of 8MB - 2 GB, 24 ECC bits per 512 bytes, Soft IP
-
Flash Memory Controller IP, Support page sizes of 512, 2K, 4K, 8K and 16K bytes NAND Flash memory, 74bit ECC correction (512 or 1K bytes sectors), Soft IP
-
ONFI 3.2 NAND Flash PHY IP Compliant to JEDEC
- Compliant to ONFI revision 3.2 standard
- Silicon proven PLL to support all frequencies from 10MHz to 266MHz, and DLL to improve data sampling accuracy dynamically
- Include ONFI 3.2 I/O pads compatible to 1.8v NV-DDR2 533 MT/s and 3v NV-DDR 200 MT/s
- Supports NV-DDR2 mode of operation supporting up to 266MHz
-
ONFI 3.2 NAND Flash Controller IP Compliant to JEDEC
- Compliant to ONFI 3.2 Specification
- Supports SDR, NV-DDR and NV-DDR2
- Included synthesizable PLL/DLL
- ONFI 3.2 compatible 1.8v NV-DDR2 I/O pads supporting up to 533MT/s is available
-
ONFI 2 NAND Flash Controller IP Compliant to JEDEC
- The ONFI 2.3 NAND Flash Controller IP Core is a full-featured, easy to use, synthesizable core, easily integrated into any SoC or FPGA development.
- Designed to support both SLC and MLC flash memories, ONFI 2.3 NAND controller IP is flexible in use and easy in implementation.
-
ONFI 5.0 NAND Fash PHY IP Compliant to JEDEC
- The ONFI 5.0 PHY IP is designed to connect seamlessly with their ONFI 5.0 Host Controller IP.
- The ONFI 5.0 PHY has complete SDR, NV-DDR, NV-DDR2, NV-DDR3 and NV-LPDDR4 TX/RX functionality and supports all the speeds defined in the ONFI specification while remaining backwards compatible with the prior versions of the ONFI specifications.
-
ONFI 4.2 NAND Flash Software Driver
- The NAND Flash Controller IP Core is a full-featured, easy to use, synthesizable core, easily integrated into any SoC or FPGA development. Designed to support SLC, MLC and TLC flash memories, it is flexible in use and easy in implementation.
- The controller works with any suitable NAND Flash memory device up to 1024Gb from leading memory providers – Micron, Samsung, Toshiba and Hynix.
