IP Catalog > Memory Controller/PHY IP > SD/eMMC IP > SD/eMMC Controller IP

SD/eMMC Controller IP

All offers in SD/eMMC Controller IP
Filter
Filter

Login required.

Sign in

Login required.

Sign in

Login required.

Sign in

Search (31)
Compare 31 SD/eMMC Controller IP from 13 vendors (1 - 10)
  • SDIO/SD Memory/MMC Slave Controller
    • Compatible with SD/SDIO specification 2.0 with 1 and 4 bit data transfer.
    • Provides SD interface to peripheral or memory device through a simple address/data interface.
    • Support SD, SPI and optional MMC bus protocol.
    • Support for both standard capacity and high capacity (SDHC) memory cards.
    Block Diagram -- SDIO/SD Memory/MMC Slave Controller
  • SD 3.0/eMMC 4.5 Host Controller
    • Host controller for SD and SDIO 3.0 with options to support eMMC 4.41 interface.
    • Allows host CPU to access SD and MMC devices.
    • Simple user interface optimized for on-chip bus connection.
    • Choices of AHB, AXI, APB, PLB, Wishbone, Avalon, SH4 and generic user interface.
    Block Diagram -- SD 3.0/eMMC 4.5 Host Controller
  • SD/SDIO 2.0 MMC Host Controller
    • Host controller for SDIO, SD memory card, and MMC interface.
    • Allows host CPU to access SD and MMC devices.
    • Simple user interface optimized for on-chip bus connection.
    • User interface supports 32-bit and 64-bit data.
    Block Diagram -- SD/SDIO 2.0 MMC Host Controller
  • eMMC/MMC Card Slave Controller
    • Compatible with eMMC/MMC specification 4.41.
    • Supports Dual Data Rate (DDR) data transfer.
    • Enhanced MMC features including Boot, Sleep Mode, Reliable Write, Multiple Partitions and Security.
    • Supports eMMC and Removable Card with option for SD 3.0 device support.
    Block Diagram -- eMMC/MMC Card Slave Controller
  • eMMC 4.5 Card Slave Controller
    • Compatible with eMMC/MMC specification 4.5.
    • Supports Dual Data Rate (DDR) data transfer.
    • Enhanced MMC features including Boot, Sleep Mode, Reliable Write, Multiple Partitions and Security.
    • Supports e2.MMC command set and HS200 mode for 200MByte/sec data rate.
    Block Diagram -- eMMC 4.5 Card Slave Controller
  • SD/SDIO 3.0 Card Controller
    • Compatible with SD/SDIO specification 3.0 with 1 and 4 bit data transfer.
    • Option to support MMC 4.2 with 8-bit data width.
    • Support SD, SPI and optional MMC bus protocol.
    • Support standard capacity, high capacity (SDHC) and extended capacity (SDXC) memory cards.
    Block Diagram -- SD/SDIO 3.0 Card Controller
  • SATA/SAS 3.0 transceiver IP with PMA and PCS layer
    • Highly customizable PMA configuration (controlled by PCS), X4 per Quad
    • Support SATA data rate 1.5/3/6Gbps
    • Support SAS data rate 1.5/3/6/12Gbps
    • Digitally-control-impedance termination resistors
    Block Diagram -- SATA/SAS 3.0 transceiver IP with PMA and PCS layer
  • SD/eMMC Host Controller
    • Supports selection between SD and eMMC
    • Supports CRC7 and CRC16 generation and verification on Hardware
    • Supports multiple block transfer
    Block Diagram -- SD/eMMC Host Controller
  • MMC Device IP Core
    • Compliant with MultiMediaCard Spec ver4.X/3.X
    • Supports MMC 1bit, 4bit, 8bit modes, as well as SPI mode
    • Maximum data rate up to 416Mbits/sec
    • All command and response types are supported
    • Supports Interrupt-mode (Wait-IRQ)
    Block Diagram -- MMC Device IP Core
  • SD/SDIO Device IP Core
    • A compact low power and scalable IP core which provides a simple, firmware-friendly cost-effective Physical Link interface for memory, i/o and combo devices, such as SD-based memory cards, Mini SD, Micro SD, SDIO Bluetooth devices, SDIO GPS, etc.
    • The SD/SDIO Device IP core is designed for an easy integration with any card controller and any system bus, with minimum firmware development overhead.
    Block Diagram -- SD/SDIO Device IP Core
×
Semiconductor IP