DSP & Math IP for SMIC

Compare 9 DSP & Math IP for SMIC from 4 vendors (1 - 9)

11 to 25 MHz Band-pass filter
- SMIC CMOS 0.18 um
- Wide cut-off frequency adjustment range (11 MHz…25 MHz)
- Programmable bandwidth
- Narrowband and wideband modes (3 MHz, 5 MHz)
Multiplexer - amplifier
- SMIC CMOS 0.18 um
- Input and output matching 50 Ohm
- No external matching components required
- Built-in adjustment of matching
1 to 200 MHz 3rd order low-pass filter with frequency adjustment system
- SMIC CMOS 0.18 um
- Wide cut-off frequency adjustment range (1 MHz…200 MHz)
- Low group delay time ripple vs. frequency (3.5 ns)
- Low pass filter cut-off frequency adjustment system (LPF CFAS)
1 to 200 MHz 3rd order Low pass filter
- SMIC CMOS 0.18 um
- Wide cut-off frequency adjustment range (1 MHz…200 MHz)
- Low group delay time ripple vs. frequency (3.5 ns)
- Low pass filter cut-off frequency adjustment system (LPF CFAS)
ISDB-T1, Segment Tuner (470-860MHz UHF)
- High Performance
- Configurable 3/4 wire controller
- Self calibrating and programmable filter corner frequencies
- 8 Bit electronically tunable tracking filter
LDPC Decoder and Encoder that supports DVB-S2 DVB-S2X DVB-T2 DVB-C2 CMMB DMB-T
- LDPC decoder and encoder that supports several standards:
- Versions available for different throughput, up to several Gbps.
- Unique architecture assures easy place and rout.
16-24Bit 100dB Voice/Audio CODEC in SMIC 40nm LL
- 16-24bit Data Conversion
- DAC: SNR (A’weighted) 100dB
- ADC: SNR (A’weighted) 100dB
16Bit 91dB Audio CODEC with headphone drivers and PWM Controller, SMIC0.18um
- DAC 91dB SNR, ADC 85dB SNR Audio Mono CODEC
- PWM Controller for Class-D Amplifier Configuration
- Capacitor-less dual channel headphone Output
- 8KHz to 48KHz Sampling Frequency
16-22Bit 97dB Stereo Audio CODEC with Linein/Digital and Analog Microphone Recording, Lineout/Headphone/Speaker Playback, SMIC 65nmll
- 16-22bit Data Conversion
- DAC: SNR (A’weighted) 97dB @ 2.5V
- ADC: SNR (A’weighted) 97dB @ 2.5V
- Sampling frequency: