Analog Front Ends IP for GLOBALFOUNDRIES
Welcome to the ultimate
Analog Front Ends IP
for
GLOBALFOUNDRIES
hub! Explore our vast directory of
Analog Front Ends IP
for
GLOBALFOUNDRIES
All offers in
Analog Front Ends IP
for
GLOBALFOUNDRIES
Filter
Compare
5
Analog Front Ends IP
for
GLOBALFOUNDRIES
from
5
vendors
(1
-
5)
-
Ultra Low-Power High-Performance AFE on GF 22FDX
- The ODT-AFE-2T2R-GF22FDX is an ultra-highperformance AFE designed in a Global Foundries 22nm process.
- The AFE includes two 12-bit, 4GSPS I/Q ADC pairs, two 14-bit, 8GSPS I/Q DAC pairs, four capless LDOs, one Bandgap reference and one temperature sensor and includes an integrated 3rd party PLL.
-
CC-100IP-RF Analog and RF Sensitivity Enhancement IP
- Enhances the Sensitivity of Analog and RF Frontend Receivers
- Enhances the PSRR od Analog and RF Frontend Receivers
- Occupies the same on chip area as standard DCAPs with at least a 600X effective capacitance increase
- Up to a 36% Dynamic Power and RF Emissions Reduction
-
IEEE 802.3cg® 10BASE-T1S Analog Front-End
- Single min 3.3V supply
- Low Power consumption meeting OPEN Alliance TC10 requirement in sleep mode
- OPEN Alliance TC10 Wake Up detection
- Voltage and current references, test infrastructures, included
- Supply regulators, 25MHz XTAL and x4 (100MHz) DLL available upon request in the target silicon process.
-
8-bit 48-Gsps Transceiver (ADC/DAC/DLL)
- 48-Gsps peak sample rate
- 8 bit resolution
- SMALLER than competing solutions
- LOWER POWER than competing solutions
-
Triple HD-video AFE digitizer - 10bits/170Mhz - 8bits/205Mhz
- Triple channel video 10bits digitizer 170Mhz
- 0.5 to 1V analog input range
- 3.3V/1.8V ±10% supply voltage, -40/+125°C
- 1P6M layout structure based on 0.18um 1P6M 3.3V/1.8V generic logic process.