Adaptive Interactive detection- Per-Survivor Processing

Overview

1: CPM Modulator/ Demodulator

Data Rate 200kbps to 10 Mbps in steps of 100Kbps
Modulation Index Programmable up to 0.5
Baseband Filtering Gaussian/Raised cosine/Root raised cosine
BT product 0.1/0.25/0.3
Burst size 100us to 2000us in steps of 100us
Output format Baseband IQ data
Mode of Transmission Burst or Continuous
Packet length Programmable
Preamble size <64'
Channel Rayleigh, Rician with K factor=10
Normalized Doppler offset 2%
SNR @ BER 10^-3(Rayleigh Channel) ≤25dB for slow & flat Rayleigh channel (Partial response CPM, BT=0.25, Gaussian Pulse shaping)

2: DQPSK/QPSK modulator

Data Rate 200kbps to 10 Mbps in steps of 100Kbps
Differential Encoding On/Off
Baseband Filtering Root raised cosine
Roll off factor 0.1/0.25/0.3/0.35/0.4/0.5 (programmable)

3: LDPC Encoder/Decoder

Block size(encoded) 128, 256,512,1024,2048,4096,8192,16384
Code rate 1/3,1/2, 2/3, 3/4, 4/5, 5/6, 6/7, 7/8, 8/9, 9/10
Operating clock 200MHz
Throughput 50MHz
Max no iterations Programmable up to 40
Soft Input/output LLR 6-bits

 

Key Features

  •  MATLAB Simulation, Using FEC code
  •  Source codes (synthesizable VHDL/ Verilog/sys Gen Model) of PHY Components
  •  Design & Development of PHY Controller software
  •  PHY characterization and configuration
  •  CPM Modulator & Demodulator
  •  DQPSK /QPSK modulator
  •  FLDPC Encoder& Decoder with different block size (encoded)
  •  FPGA Implementation

Benefits

  •  High speed & Reliable Communication
  •  High data rate enabling faster & real time communication
  •  Suitable for High performance computing requirement
  •  Configurable to accommodate multiple demodulation schemes, decoding algorithms
  •  Helpful in joint data detection and adaptive parameter filtering
  •  

Technical Specifications

×
Semiconductor IP