IP Catalog > USB 2.0 High Speed PHY

USB 2.0 High Speed PHY IP

Filter
Filter

Login required.

Sign in

Login required.

Sign in

Login required.

Sign in

Search (64)
Compare 64 IP from 15 vendors (1 - 10)
  • High Speed Inter-CHIP USB 2.0 PHY
    • High-Speed 480Mbps data rate only
    • Source-synchronous serial interface
    • No power consumed unless a transfer is in progress.
    • Maximum trace length of 10cm
    Block Diagram -- High Speed Inter-CHIP USB 2.0 PHY
  • USB 2.0 OTG High / Full / Low- Speed Dual Role IP Core
    • Support SW controlled host/device role switching.
    • Support Fullspeed and Lowspeed
    • Support Control, Bulk, Interrupt and Isochronous Transfer Types
    • Support L1/L2 power saving modes for USB 2.0 port
    Block Diagram -- USB 2.0 OTG High / Full / Low- Speed Dual Role IP Core
  • USB 2.0 PHY
    • Compliant with USB2.0 and USB1.1 specification
    • Compliant with UTMI Specification Version 1.0
    • Supports HS(480Mbps)/FS(12Mbps) /LS(1.5Mbps) modes
    • USB Data Recovery and Clock Recovery on receiving
    • SYNC and EOP generation on transmit packets and detection on receive packets
  • USB 2.0 PHY IP core
    • Complies with USB specifications, rev. 2.0 and 1.1
    • Complies with UTMI+ specification, level 3, rev. 1.0
    • Supports 480Mb/s (HS), 12Mb/s (FS) and 1.5MB/s (LS) serial data transmission rates
    • Supports 8-bit unidirectional Parallel Interface Engine (PIE) bus for HS, FS and LS modes, and Serial Interface Engine (SIE) for FS and LS modes
    Block Diagram -- USB 2.0 PHY IP core
  • USB 2.0 PHY IP, Silicon Proven in TSMC 16FFC
    • Compliant with USB2.0 and USB1.1 specification
    • Compliant with UTMI Specification Version level 3.
    • Supports HS(480Mbps)/FS(12Mbps) /LS(1.5Mbps) modes
    • All required terminations, including 1.5Kohm pullup on DP and DM, and 15Kohm pull-down on DP and DM are internal to chip
    Block Diagram -- USB 2.0 PHY IP, Silicon Proven in TSMC 16FFC
  • USB 2.0 PHY
    • Designed to the USB 2.0 specification, and operates at High Speed (480Mbps), Full Speed (12Mbps), and Low Speed (1.5Mbps)
    • Complies with the UTMI v1.05 specification
    • Multiple reference clock supported from 9.6MHz up to 52MHz
    • 8-bit 60MHz and 16-bit 30MHz parallel interfaces
    • Battery Charging Specification v1.2
    Block Diagram -- USB 2.0 PHY
  • USB 2.0 PHY IP, Silicon Proven in TSMC 90G
    • Compliant with USB2.0 and USB1.1 specification
    • Compliant with UTMI Specification Version level 3.
    • Supports HS(480Mbps)/FS(12Mbps) /LS(1.5Mbps) modes
    • All required terminations, including 1.5Kohm pullup on DP and DM, and 15Kohm pull-down on DP and DM are internal to chip
    Block Diagram -- USB 2.0 PHY IP, Silicon Proven in TSMC 90G
  • USB 2.0 PHY IP, Silicon Proven in TSMC 65LP
    • Compliant with USB2.0 and USB1.1 specification
    • Compliant with UTMI Specification Version level 3.
    • Supports HS(480Mbps)/FS(12Mbps) /LS(1.5Mbps) modes
    • All required terminations, including 1.5Kohm pullup on DP and DM, and 15Kohm pull-down on DP and DM are internal to chip
    Block Diagram -- USB 2.0 PHY IP, Silicon Proven in TSMC 65LP
  • USB 2.0 PHY IP, Silicon Proven in TSMC 55LP
    • Compliant with USB2.0 and USB1.1 specification
    • Compliant with UTMI Specification Version level 3.
    • Supports HS(480Mbps)/FS(12Mbps) /LS(1.5Mbps) modes
    • All required terminations, including 1.5Kohm pullup on DP and DM, and 15Kohm pull-down on DP and DM are internal to chip
    Block Diagram -- USB 2.0 PHY IP, Silicon Proven in TSMC 55LP
  • USB 2.0 PHY IP, Silicon Proven in TSMC 12FFC
    • Compliant with USB2.0 and USB1.1 specification
    • Compliant with UTMI Specification Version level 3.
    • Supports HS(480Mbps)/FS(12Mbps) /LS(1.5Mbps) modes
    • All required terminations, including 1.5Kohm pullup on DP and DM, and 15Kohm pull-down on DP and DM are internal to chip
    Block Diagram -- USB 2.0 PHY IP, Silicon Proven in TSMC 12FFC
×
Semiconductor IP