SD/eMMC Controller IP
All offers in
SD/eMMC Controller IP
Filter
Compare
58
SD/eMMC Controller IP
from 18 vendors
(1
-
10)
-
SDIO/SD Memory/MMC Slave Controller
- Compatible with SD/SDIO specification 2.0 with 1 and 4 bit data transfer.
- Provides SD interface to peripheral or memory device through a simple address/data interface.
- Support SD, SPI and optional MMC bus protocol.
- Support for both standard capacity and high capacity (SDHC) memory cards.
-
SD 3.0/eMMC 4.5 Host Controller
- Host controller for SD and SDIO 3.0 with options to support eMMC 4.41 interface.
- Allows host CPU to access SD and MMC devices.
- Simple user interface optimized for on-chip bus connection.
- Choices of AHB, AXI, APB, PLB, Wishbone, Avalon, SH4 and generic user interface.
-
SD/SDIO 2.0 MMC Host Controller
- Host controller for SDIO, SD memory card, and MMC interface.
- Allows host CPU to access SD and MMC devices.
- Simple user interface optimized for on-chip bus connection.
- User interface supports 32-bit and 64-bit data.
-
eMMC/MMC Card Slave Controller
- Compatible with eMMC/MMC specification 4.41.
- Supports Dual Data Rate (DDR) data transfer.
- Enhanced MMC features including Boot, Sleep Mode, Reliable Write, Multiple Partitions and Security.
- Supports eMMC and Removable Card with option for SD 3.0 device support.
-
eMMC 4.5 Card Slave Controller
- Compatible with eMMC/MMC specification 4.5.
- Supports Dual Data Rate (DDR) data transfer.
- Enhanced MMC features including Boot, Sleep Mode, Reliable Write, Multiple Partitions and Security.
- Supports e2.MMC command set and HS200 mode for 200MByte/sec data rate.
-
SD/SDIO 3.0 Card Controller
- Compatible with SD/SDIO specification 3.0 with 1 and 4 bit data transfer.
- Option to support MMC 4.2 with 8-bit data width.
- Support SD, SPI and optional MMC bus protocol.
- Support standard capacity, high capacity (SDHC) and extended capacity (SDXC) memory cards.
-
eMMC/SD/SDIO Combo IP
- The eMMC/SD/SDIO Combo IP is a comprehensive solution designed to support high-performance storage and I/O connectivity for a wide range of applications
- This IP integrates a host controller and PHY, enabling seamless communication with eMMC, SD, and SDIO devices
- When connecting the SD/SDIO device, the IP supports DS, HS, SDR12, SDR25, SDR50, SDR104, and DDR50 speed modes
-
SD Card Controller - Verifies SD card interface functionality, ensuring reliable data transfer and compliance with specifications
- The SD Card Controller Verification IP (VIP) is a tool designed to ensure the proper functionality and performance of SD card memory interfaces in SoCs. It validates key operations like read/write cycles, error handling, and power management across multiple SD card versions.
- This VIP is widely applicable in various fields, from SoC design validation to mobile devices and embedded systems. It guarantees reliable data transfer and smooth integration with SD card interfaces in industries such as automotive, consumer electronics, IoT, and more
-
Simulation VIP for eMMC
- High speed modes
- 200 MB/s Read and Write operation. HS400 Dual Data Rate Read and Write interface
- General eMMC Functionality
- 48-bit input command format and R1, R1b, R2 response formats
-
SDIO UHS II Verification IP
- Supports SD specification UHS-II Adddendum version 2.00 compliant.
- Supports Part E1 SDIO specification version 4.10.
- Supports SD specification physical layer version 4.0/4.20/5.0/5.10/6.0/6.10/7.0/7.10/8.0(Draft).
- Supports bi-directional receiver/transmitter (2ch) supporting both Full Duplex and Half Duplex modes.
